1
$\begingroup$

This is a follow-up question from my previous question. What I was trying to do was to plot the contour plot of the following given scalar function. $$\Phi(x,y,z)=\int_{h=-a}^{a}\int_{k=-b}^{b}\int_{l=-c}^{c}{\dfrac{dh*dy*dl}{\sqrt{(x-h)^2+(y-k)^2+(z-l)^2}}}$$

I used Rubi as an integrating tool to speed up the processing of the code (provided in the accepted answer to the linked question).

After calculating the integral I calculated the Gradient of the scalar function using the Grad[] function provided in Mathematica. Before trying to plot the vector gradient field of the scalar I plotted a contour plot of the same (for some $z$) and then plotted the potential as a function of $x$ and $y$ for some $z=c$; $\Phi(x,y;z=c)$. This code outputted both contour and Plot3D[] function correctly but when I try to plot its vector field using VectorPlot3D[] it gives out a blank plot.

The code would be as follows:

a = 1; b = 1; c = 1;

int0 = Integrate[1/Sqrt[(x - h)^2 + (y - k)^2 + (z - l)^2], l];

int1 = FullSimplify[(int0 /. {l -> c/2}) - (int0 /. {l -> -(c/2)})];

rint2[x_, y_, z_, h_, k_] = Int[int1, k];

rint2def[x_, y_, z_, h_] = rint2[x,y,z,h,b/2] - rint2[x,y,z,h,-(b/2)]// 
Simplify[#, Assumptions -> -(a/2) <= h <= a/2 && -(b/2) <= k <= b/2 && 
   x \[Element] Reals && y \[Element] Reals && z \[Element] Reals] &;

rint3[x_, y_, z_] := NIntegrate[rint2def[x, y, z, h], {h, -(a/2), a/2}]

Now, I plot the ContourPlot for $z=1/4$

ContourPlot[rint3[x, y, 1/4], {x, -2, 2}, {y, -2, 2},ImageSize -> 200]

Which gives the result as

enter image description here

Now, plotting the Plot3D graph for $z=1/4$

Plot3D[rint3[x, y, 1/4], {x, -2, 2}, {y, -2, 2}]

The output of which is

enter image description here

Now when I try to plot the vector field of the scalar potential, the code would be: 

VectorPlot3D[Grad[rint3[x, y, z], {x, y, z}], 
{x, -2, 2}, {y, -2, 2}, {z, -2, 2}]

The output is this. :(

enter image description here

I don't get it why is this plot coming up blank. I have plotted other vector fields in a similar way but never got a problem like this by using the Grad[] function. Everything is outputted just as I wanted except for the vector field. What can be done?

Improve this question
$\endgroup$
8
  • $\begingroup$ Unfortunately your code doesn't evaluate, I cannot reproduce the line ContourPlot $\endgroup$
    – Ulrich Neumann
    Commented Jul 16, 2018 at 15:09
  • $\begingroup$ Use Rubi. Run this notebook after downloading and run my codes in the same notebook. For more info check out the linked questions accepted answer. To download go to -> apmaths.uwo.ca/~arich $\endgroup$
    – diffusiondiver11
    Commented Jul 16, 2018 at 15:10
  • 2
    $\begingroup$ My intention was to answer your question, not to do some exercises in rubi! $\endgroup$
    – Ulrich Neumann
    Commented Jul 16, 2018 at 15:20
  • $\begingroup$ No, but the code will not run without Rubi :-/ . It is to improve the performance of code else it takes a large amount of time to calculate with built-in functions. This is why the accepted answer in the linked question recommended this. The Int[] function is specific to Rubi. $\endgroup$
    – diffusiondiver11
    Commented Jul 16, 2018 at 15:24
  • 3
    $\begingroup$ Have you tried VectorPlot3D[ Grad[rint3[x, y, z], {x, y, z}]//Evaluate, {x, -2, 2}, {y, -2, 2}, {z, -2, 2}] ? $\endgroup$
    – chris
    Commented Jul 16, 2018 at 15:48

2 Answers 2

Reset to default
2
$\begingroup$

The solution to the problem is as mentioned by @chris in comments of the question

Replace the VectorPlot3D[] command which is

VectorPlot3D[Grad[rint3[x, y, z], {x, y, z}], 
{x, -2, 2}, {y, -2, 2}, {z, -2, 2}]

by

VectorPlot3D[Grad[rint3[x, y, z], {x, y, z}]//Evaluate, 
{x, -2, 2}, {y, -2, 2}, {z, -2, 2}]

"//Evaluate" command has been added.

The output will be

Gravitational Field due to a cube

Improve this answer
$\endgroup$
1
$\begingroup$

If a try a similar problem (without rubi) 

VectorPlot3D[Grad[z Exp[-x^2 - y^2], {x, y, z}], {x, -2, 2}, {y, -2, 2},{z,-2,2}]

enter image description here

result is ok. Seems to be a rubi-problem???

Improve this answer
$\endgroup$
3
  • $\begingroup$ Actually no. It's not a ruby problem I guess because I did the same without ruby and got the same blank output. What you can do is to replace Int[ ] wherever it is used with the built-in function Integrate[ ]. That would do the work without ruby but a bit slower. $\endgroup$
    – diffusiondiver11
    Commented Jul 16, 2018 at 15:42
  • $\begingroup$ The problem is not with Grad or with Rubi. That is why I am confused. Everything else works fine with/without rubi but the problem with vector field remains the same. $\endgroup$
    – diffusiondiver11
    Commented Jul 16, 2018 at 15:50
  • $\begingroup$ Check @chris 's comment above. $\endgroup$
    – diffusiondiver11
    Commented Jul 16, 2018 at 15:52

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.