# Mathematica gives wrong result while Wolfram|Alpha is correct

Why does Mathematica and Wolfram|Alpha give different results based upon the same code?

I know Wolfram|Alpha's 7.85 is correct.

• Try: NIntegrate[Sqrt[(2 t)^2 + (4 - 3 t^2)^2], {t, 0, 2}] Oct 11, 2013 at 22:23
• Looks like a bug to me. Integrate[Sqrt[(2 t)^2 + (4 - 3 t^2)^2], t]; N[(%/.t->2), 20] gives the same wrong result. Oct 11, 2013 at 22:50
• Wolfram Alpha is returning numerical integration because the symbolic integration is timing out. Jun 15, 2015 at 14:33

Artes' guess seems basically right. Here is a way to reach the correct result. First, the antiderivative returned by Mathematica:

i0 = FullSimplify[
Integrate[Sqrt[(2 t)^2 + (4 - 3 t^2)^2], t],
t > 0]

(* (2 (Sqrt[16 - 2 I (-5 I + Sqrt[11]) t^2] Sqrt[8 + I (5 I + Sqrt[11]) t^2] (
5 (-5 I + Sqrt[11]) EllipticE[ArcSin[1/2 t Root[9 - 5 #1^2 + #1^4 &, 4]],
1/18 (7 - 5 I Sqrt[11])] -
(11 I + 5 Sqrt[11]) EllipticF[ArcSin[1/2 t Root[9 - 5 #1^2 + #1^4 &, 4]],
1/18 (7 - 5 I Sqrt[11])]) +
9/2 t (16 - 20 t^2 + 9 t^4) Root[36 + 10 #1^2 + #1^4 &, 3])) /
(27 Sqrt[(-5 - I Sqrt[11]) (16 - 20 t^2 + 9 t^4)])  *)


If we add to Pi to the two ArcSin expressions in i0, we get another antiderivative:

i1 = i0 /. a_ArcSin :> Pi + a;

D[i0, t] // FullSimplify[#, t > 0] &
D[i1, t] // FullSimplify[#, t > 0] &

(* Sqrt[16 - 20 t^2 + 9 t^4]
Sqrt[16 - 20 t^2 + 9 t^4] *)


It turns out that i1 is the continuation of i0:

Plot[{i0, i1}, {t, 0, 2},
PlotStyle -> {Directive[Thick, Blue], Directive[Thick, Red]}]


Hence,

(i1 /. t -> 2.) - (i0 /. t -> 0.)
(* 7.847 - 8.88178*10^-16 I *)


yields the correct (approximate) result.

Such are the pitfalls of elliptic integrals and their symbolic antiderivatives, I suppose. NIntegrate bypasses antiderivatives and estimates the integral from the (real) values of the integrand. It should never encounter such problems.

Further analysis

The plots below show the discontinuities in the EllipticE and EllipticF that lead to the incorrect value for Integrate. The discontinuities violate the conditions necessary to apply the Fundamental Theorem of Calculus (an antiderivative is by definition supposed to be differentiable and therefore continuous).

{x0, x1} = FixedPoint[  (* find the discontinuity *)
Function[{x}, If[Im@Chop[i0 /. t -> x] != 0, {First[#], x}, {x, Last[#]}]][Mean[#]] &,
{1.599, 1.6}]

Table[
With[{part = part, ell = ell},
ContourPlot[
part[ell[ArcSin[1/2 t Root[9 - 5 #1^2 + #1^4 &, 4]],
1/18 (7 - 5 I Sqrt[11])]] /. t -> x + I y,
{x, 0, 2}, {y, -1, 1},
MaxRecursion -> 3, PlotPoints -> 25,
AxesOrigin -> {x0, 0}, Axes -> True,
AxesStyle -> Directive[Thin, Red], PlotLabel -> part@ell]
],
{ell, {EllipticE, EllipticF}}, {part, {Re, Im}}] // GraphicsGrid

(* {1.5991767250934696, 1.5991767250934699} *)


To get the real-valued antiderivative, piece together different branches:

anti = Piecewise[{
{i0, -x0 <= t <= x0},
{i0 /. a_ArcSin :> Pi + a, t >= x1},
{i0 /. a_ArcSin :> -Pi + a, t <= -x1}},
Indeterminate];

Plot[anti, {t, -4, 4},
Mesh -> {{-x0, x0}}, MeshShading -> {Green, Blue, Red}]


• I have a question -- what an antiderivative is? My guess is the stuff one obtains after integration. Oct 12, 2013 at 5:14
• @LeoFang That's basically right. An antiderivative of a function $f$ is a function $F$ whose derivative $F'$ equals $f$. Also called an (indefinite) integral. It's the stuff returned by Integrate[f[t], t] (with no interval for t). You may know it by a different name. Oct 12, 2013 at 11:24

This does not really answer the question as to why Mathematica's Integrate yields an apparently wrong answer. This simply states why the two answers are different. It seems Wolfram|Alpha does not attempt to do a symbolic integration (which is what your input asks for) before taking its numerical value. As I stated in my comment, using NIntegrate gives the correct answer similar to Wolfram|Alpha. So, in short, Wolfram|Alpha uses NIntegrate directly. Which is why the following input yields the right answer in Mathematica:

NIntegrate[Sqrt[(2 t)^2 + (4 - 3 t^2)^2], {t, 0, 2}]


7.847

• To get an insight what might go wrong see this answer: Why does Integrate declare a convergent integral divergent?. You can see there are elliptic functions as well as ArcSin, together they can produce unwanted imaginary result. There is another problem with real part but I guess they both could be resonably explained (as an inproper phase rule) Oct 11, 2013 at 22:50
• @Artes. Thanks for the insight. Oct 11, 2013 at 22:58
• Thanks, I guess I'll just use NIntegrate to get a numerical answer in the future. Oct 12, 2013 at 8:24

This is not an answer, but comparing the answer with Maple, and also showing step by step integration using Rubi, which might help point to where Mathematica went wrong.

## Mathematica Integrate

r = Simplify@Integrate[Sqrt[(2 t)^2 + (4 - 3 t^2)^2], t]


N[r /. t -> 2 - r /. t -> 0, 20]


## Maple

r:=int(sqrt( (2*t)^2+(4-3*t^2)^2),t=0..2);


evalf[20](r);
7.8469978240383303061+7.9695375019434005093*10^(-20)*I


F in the above is EllipticF and E is EllipticE. So both Maple and Mathematica have the answer in terms of Elliptic functions. To see step by step process, with the hope to better find where the bug happens, I used Rubi:

## Rubi 4.2 step by step

ShowSteps = True;
r = Int[Sqrt[(2 t)^2 + (4 - 3 t^2)^2], t]


result = %;
N[result /. t -> 2 - result /. t -> 0, 20]


In one of those steps, the Integrate went wrong. Need more time to analyze.

• Up to t==Pi/2 the symbolic integration works. Then it becomes complex
– Rojo
Oct 12, 2013 at 0:11
• @Rojo Your argument converges to this one Oct 12, 2013 at 0:26
• Great comparison! Do you have some comment on why Rubi and Mathematica wrong results are the same? My impression was that Rubi is practically independant on Mathematica algorihms for integration. May 26, 2015 at 18:52

I observed this behavior while at a training session at Wolfram Headquarters, and there seems to be an issue with using Integers here:

Integrate[Sqrt[(2. t)^2 + (4. - 3. t^2)^2], {t, 0, 2}] // N
(* 7.847 *)


Specifying Real numbers yields the correct result. I can only assume that Wolfram Alpha is performing this calculation with Real numbers as well.

• Note that Integrate[Sqrt[(2. t)^2 + (4. - 3. t^2)^2], {t, 0, 2}] returns unevaluated, so the // N basically converts it to an NIntegrate. Oct 12, 2013 at 0:39
• Thanks - I missed that. Does this suggest that the problem is with NIntegrate? Oct 12, 2013 at 0:47
• No, NIntegrate gets it right. The problem is that Integrate takes an algebraic approach, and in this case, the interval $0 \le t \le 2$ seems to cross a branch cut of the antiderivative. Oct 12, 2013 at 1:16

Okay, I'm slowly going through the questions involving elliptic integral evaluations. Yet again, none of the software mentioned in this thread have managed to produce a "clean" expression. For the benefit of future readers, here's a tidier closed form for your perusal:

N[2 (7 Sqrt[5] + 2 (10 EllipticE[2 π/3, 11/12] + EllipticF[2 π/3, 11/12])/Sqrt[3])/9, 20]
7.8469978240383303061

NIntegrate[Sqrt[(2 t)^2 + (4 - 3 t^2)^2], {t, 0, 2}, WorkingPrecision -> 20]
7.8469978240383303060