Questions on creating visualizations from functions or data using high-level constructors such as Plot, ListPlot, Histogram, etc.

learn more… | top users | synonyms (5)

0
votes
0answers
4 views

InterpolationOrder 2 or more in ListLogLinearPlot

I'm using the fuction ListLogLinearPlot, but the plot is to square, i would like to have InterpolationOrder 2, but there is not this command for the fuction. I tried to make my own interpolation, ...
0
votes
0answers
8 views

How do I color Riemann integral rectangles using conditionals?

I'm builind a function to visualize the Riemann Integration process to any function using rectangles. Everything is fine, except that I need the color of the rectangles to change if they're under the ...
2
votes
2answers
82 views

Extracting points from the MeshFunctions of Plot3D

I am trying to extract the points from the mesh lines of a 3D plot. (Not my actual function.) ...
3
votes
2answers
91 views

Positioning axes labels

I need to change the position of my axes labels such that the y-axis label is in the middle and parallel to the y-axis. I'd also like the x-axis label to be in the middle of the x-axis rather than ...
1
vote
1answer
36 views

Same scale for all the axes in Plot3D

I can't find this in the documentation. How do you force the same scale for all the axes when making a 3D plot? There is the BoxRatios option, but this only changes ...
6
votes
2answers
182 views

Curvature Application

I found these amazing animations at https://courses.engr.illinois.edu/tam212/avt.xhtml#avt which I think will be wonderfully useful when teaching multivariable calculus next semester. I've started to ...
0
votes
1answer
26 views

ListLinePlot partial filling

I use ListLinePlot to plot data: ...
1
vote
1answer
98 views

Using codes to replicate drawing tools in Mathematica

This might seem very obvious but I'm on the verge of losing all the annotations I've made on a graph because I can't figure a way to save it after using the drawing tool to add a few extras to the ...
3
votes
1answer
39 views

Contourplot fails to plot x==0 if plot range is from 0

The simple command ContourPlot[x == 0, {x, 0, 1}, {y, 0, 1}] fails to plot the line x==0. However If I add a small buffer it ...
1
vote
1answer
39 views

Increasing Plot3D speed when plotted function is Eigenvalue

This is probably a really simple fix, but I'm fairly new to Mathematica and am not sure how to do this properly. I know that trying to plot eigenvalues directly can be computationally expensive, so ...
2
votes
3answers
118 views

Mathematica's ViewPoint versus MATLAB's View command

Here is a bit of code borrowed from Parametrize a circle as a tube?. ...
10
votes
0answers
166 views
+100

Implicitly defined compact complicated surface

A Seifert surface for the (3,4) torus knot is defined by the intersection of $S^3 \subset \mathbb{C}^2$ with the set $\arg(z^4-w^3)=0$. The boundary is at $z^4=w^3$ and this is the torus knot. Here ...
15
votes
5answers
760 views

How to make a Line[] with no end?

I'm trying to do this: In this graph, the secant points are aproximated in order to become the tangent, it seems I need some kind of function which plots a line based on two points and it's points ...
13
votes
4answers
479 views

How to plot Ramanujan's continued fraction in Mathematica?

I want to plot Ramanujan's continued fraction: $$R(q)=\cfrac{q^{1/5}}{1+\cfrac{q}{1+\cfrac{q^2}{1+\ddots}}}$$ but I do not know how to define this function in Mathematica. How do I define and plot ...
0
votes
1answer
55 views

Plotting the tangent of a curve [duplicate]

I'm new to Mathematica and this is probably child's play for most people, but I wanted to know how to plot the tangent of the function below at the point e=1/4 : ...
0
votes
2answers
83 views

Examining the equations of a Differential Op Amp

I want to examine the equations of a differential Operational Amplifier, specifically I want to examine how the tolerances of the resistors affect the resulting differential gain and common mode ...
6
votes
1answer
174 views

Plotting iterated function system images

I'm new not only to this forum, but to Mathematica in general, evidently. I'm running into an issue, and my best attempts at Googling solutions (and trying the search box for this forum) came up with ...
0
votes
1answer
23 views

Transpose four lists of data into two lists for use in List Plot [on hold]

I have four lists of data x1 = {1,3,5,7} y1 = {0,2,4,6} x2 = {10,12,14,16} y2 = {8,10,12,14} In one line is it possible to use transpose to get two lists which ...
6
votes
2answers
2k views

Formatting Ticks and FrameTicks labels with a function

Is there a convenient way to format tick labels? In this example I would like to use the default Mathematica tick intervals, but simply convert the X axis labels to strings with "s" added. As you ...
4
votes
4answers
415 views

How to create a thick spiral then extract the coordinates from the image?

I can plot a thin spiral using just: $ r=\frac{\theta }{2 \pi };$ PolarPlot[theta/2 Pi,{theta,0,2 Pi}] but is there a way to plot a spiral that has actual area ...
14
votes
2answers
709 views

How to get grid lines at all (log) tick marks in Version 10?

In Version 7 using GridLines -> Automatic (or All) would put a grid line at every log-spaced tick mark: ...
5
votes
2answers
170 views

Labels strangely rendered in PDF

I'm new to Mathematica so I apologize if this is obvious to answer. Anyway, using the following code (most of it is extraneous, to make the plot look the way I want) I plotted the Morse potential, ...
1
vote
1answer
38 views

How to change the position of the PlotLabel? [duplicate]

PlotLabel positions the label on top of the plot by default. I would like to put it below the plot. How can I do that? Thank you.
1
vote
1answer
45 views

Change only tick labels while keeping default ticks [duplicate]

Consider the following Plot3D (although the same question might be asked for the 2D case) ...
19
votes
2answers
518 views

Specifying non-conflicting PlotTheme options

A bug or limitation in 10.0.0 affects a few of these examples; it was resolved in 10.1.0. I am trying out Mathematica 10 on https://programming.wolframcloud.com. ...
45
votes
1answer
1k views

Is it possible to define a new PlotTheme?

In version 10 one can define, say, $PlotTheme = "Scientific" Which changes the appearance of all plots. This is fantastic because on the one hand I can have nice ...
0
votes
0answers
153 views

contour plot (cartesian) using spherical coordinates postions

Let´s say that I have a data in the following configuration: { Lat, Long,distance, energy}-> lat, long -> galactic coordinates, distance unit - parsecs (3.2 ly) energy unit- ergs. I need to plot ...
3
votes
2answers
97 views

Find the area of a contour surface plotted by ContourPlot3D

I am looking for a way to find the surface area of a contour from ContourPlot3D. Here is an example where I might like to find the area of the contour surface to ...
0
votes
0answers
42 views

Plotting complicated function with not exactly defined angle [on hold]

I want to plot the time-averaged electric energy density near the focus according to Boivin and Wolf. Now I have my three intensities. I am very new to Mathematica and my problem is that I can't ...
2
votes
2answers
56 views

Export NDSolve results

I can see the correct result of my NDSolve when I plot them with large PlotPoints. ...
2
votes
1answer
61 views

Large data -list contour plot -list log plot

I've a large data make matrix 100*100 and and other two sets of data represent the x and y axis. Each value in the matrix is a related to one value in x and one value of y. I ask about a way to plot ...
0
votes
0answers
46 views

Defining A Function With A Certain Domain

I am trying to plot the numerical range a matrix, which is a set defined like so: $W(A) = \{\langle Ax,x \rangle : x \in \mathbb{C}^n \text{ and } ||x|| = 1\}$ In other words, I am trying to plot ...
1
vote
0answers
67 views
0
votes
1answer
45 views

Plotting based on all previous equation results [on hold]

I have a plot Plot[40500*x^(-0.1), {x, 1, 100}, PlotRange -> {0, 50000}] Now, I am trying to plot the cumulative of these y values. I'll try to explain on an ...
2
votes
2answers
131 views

Approximation of definite integral by parabolas

This question is related to Trapezoid approximation to definite integral. As promised, I am now asking about how to draw approximation of integrals by parabolas. I tried to modify MarcoB's code, and I ...
2
votes
1answer
99 views

Help me export high-resolution TIFF figure

I have generated a figure in MMA by ContourPlot3D. How can I export this figure in high-resolution TIFF format(say, 1200 dpi for lines, 300 dpi for halftone and ...
25
votes
3answers
2k views

Is there something like DensityPlot3D to visualize atomic orbitals?

I'm visualizing some hydrogen like atomic orbitals. For looking at plane slices of the probability density, the DensityPlot function works well, and with something ...
12
votes
4answers
2k views

All curves in plot have the same style. Cannot be fixed with Evaluate[]

Usually, when I plot multiple curves in Mathematica Plot[{x,x^2,x^3},{x,0,1}] they are given different colors. However, if I try to construct a list inside the ...
6
votes
3answers
383 views

How to disable differential styles/markers/etc. for multiple entities?

For functions that can produce multiple "style-able" entities, Mathematica by default will give each such entity a different style. Similar conventions apply to other features, either by default, or ...
2
votes
2answers
103 views

Plotting a set of points given by a complex expression [on hold]

A have the set consisting of the complex numbers $1+3r \cosθ−ir \sinθ$, where $r∈[0,1]$ and $θ$ may vary between $0$ and $2π$. This is my first encounter with Mathematica, and am having difficulty ...
1
vote
1answer
469 views

Plotting Fresnel function

I am trying to plot the partial sums and the Cesàro means of the function $\sqrt{|x|}$ and for $a_{n}$, I obtained the following code which contains FresnelS. ...
4
votes
1answer
368 views

3D Plot of The Riemann Zeta Function

I am a new user and i would appreciate your help to visualize the 3D of the following function. Edit I tried this ...
0
votes
2answers
124 views

How can I compute the real part of $\zeta^2$ numerically? [duplicate]

I want to compute and plot $\Re(\zeta(x+iy)^2)$ and $\Im(\zeta(x+iy)^2)$. How can I do that with Mathematica?
1
vote
1answer
78 views

Labeling a ListPointPlot3D

I've a problem with the label of ListPointPlot3D. I tried to reproduce a plot I've seen in a paper, but I was not able to reproduce it completely. Following and example of my data: ...
3
votes
2answers
143 views

Von Kármán Vortices

How may we vary vectors in StreamPlot[{y, -Sin[x/2]}, {x, -4, 12}, {y, -4, 4}, StreamColorFunction -> "Rainbow", AspectRatio -> Automatic] to obtain a ...
0
votes
1answer
67 views

Variable ViewPoint coordinates

Can I use the option ViewPoint on Graphics3D[], with its setting a variable function? For example: ...
5
votes
1answer
196 views

How to plot the result of this singular integral?

Please I open a new post here after this one : http://mathematica.stackexchange.com/a/59203/10158 Now I want to plot the function $f(a,b)$ as a function of $b$ for different values of $a$ : $a=0.5$ , ...
1
vote
1answer
204 views

Plotting Integral equation

I want to plot the following indefinite integral : $C_l^{CC}=\int k^2\mathrm{d}k\: [e^{-2k^{2}}P_{Cl}^2(k\eta)|\dot{h}(\eta)|^2]$ with k from 0 to some large value (considered to be $\infty$), ...