3
votes
1answer
161 views

Circular membrane vibration simulation

I'm new in Mathematica and I'm trying to simulate the vibration of a circular membrane for math project but I don't even know how to start. The wave equation describes the displacement of the ...
1
vote
2answers
69 views

Manipulate is evaluated slowly

I have this function: f[k_, θ_, ϕ_] := Cos[k*Cos[θ]*x + k*Sin[θ]*y - ϕ] I want to change the parameters $\theta, \phi,$ and $k$ to see the effects on the ...
1
vote
1answer
62 views

Manipulate gives the output as a blank plot, but I'm not sure why [duplicate]

I'm using Mathematica 9 to try to manipulate a 3D plot. My code is: ...
0
votes
0answers
56 views

I see error messages when I use LogLinear Plot but not when I use Plot

I have written an application with Manipulate that plots the results of several calculations. What I find strange is that when I have my application use ...
0
votes
0answers
68 views

How can I scale a plot in my Manipulate?

I want use scale in the same way as Mister Trevor Cole in his most excellent demonstration at the Wolfram Demonstrations site: ...
1
vote
1answer
54 views

What is the correct way to plot a dynamically generated list of functions?

For example, I want to generate a list of random waves and plot them. Then I wrote f:=Random[Real] h:=Floor[f*20] And then ...
0
votes
0answers
56 views

Trouble outputting Plot

I am trying to solve a system of ODEs and plot them with Manipulate but I keep getting blank outputs. Below is my code: ...
0
votes
1answer
30 views

Manipulate Discrete Values Labelling

I have 3 lists of plots (generated in other code), rawplots, weightplots,linearizedplots. ...
0
votes
0answers
70 views

StreamPlot,StreamPoints and the Fisher's equation

I'm trying to reproduce a StreamPlot from a vector field encoundered while analyzing the Fisher's equation (http://en.wikipedia.org/wiki/Fisher%27s_equation), for a ...
0
votes
2answers
76 views

How to plot multiple curve in a same plot with Manipulate

The manipulate function in Mathematica allows the users to adjust the values of the parameters in a graphical way. How do I plot multiple functions in a same graph and also I can use manipulate at the ...
1
vote
2answers
71 views

Combining Plot and ListPlot in a manipulation [closed]

I have a plot of data points using ListPlot and another plot using a function. I want the function to look like the data points. I am able to use ...
1
vote
2answers
51 views

Enlarging a contour plot

I just started using Mathematica, and when I entered the following: ...
0
votes
2answers
67 views

Edit plot after creation [duplicate]

I try to find a way to manipulate a plot I created before. (for full code take the fuction x[t_]:=Sin[2t] ) Let's say I have a plot: ...
0
votes
1answer
63 views

How to use Button as a control in Manipulate

I am trying to use Button as a controller in Manipulate. I have done some thing like this: ...
0
votes
1answer
84 views

Showing Two Manipulated Plots Together

I want to show a scatter plot and bar chart next to each other in order to show the change in both factors for each county. The scatter plot shows life expectancy per county on the basis of income, ...
1
vote
2answers
75 views

Manipulate which creates and deletes Manipulators dynamically

I want to plot a function in a Manipulate in which the number of terms varies and a Manipulator for the coefficient of each term ...
1
vote
3answers
111 views

Why does Dynamic for PlotRange in ListLinePlot prevent the proper range from being used?

I am using Manipulate to simulate Brownian motion. I want to be able to zoom in. Thus, I want to use Dynamic for the ...
2
votes
1answer
130 views

Manipulate for variable number of sliders

I'm trying to use Manipulate for plotting multidimensional data, where higher dimensions are defined as sliders. First, this simple example works: ...
-3
votes
1answer
101 views

How to show a general graphic (not a Plot) inside a Manipulate

I'm building a little interface, which consists only of a button, as you can see here: ...
1
vote
1answer
88 views

Scope of variables within a Manipulate expression [duplicate]

I have a problem in defining the local variables. I have this code: ...
1
vote
1answer
101 views

Behaviour of OutputResponse in ListLinePlot

Ok, I think this is not the best way to do this, so I'm open minded for every suggestion doing it in a better way. The Question is why does ListLinePlot not plot ...
7
votes
3answers
365 views

1D quasicrystal: points on a line nearest to points on a lattice

I have a simple lattice / line manipulation: ...
1
vote
1answer
76 views

Functions defined via inverse Laplace transform - plotting issue [closed]

I need to define a function $k(t,c_1,\alpha_1,c_2,\alpha_2)$ in the following manner: ...
0
votes
2answers
139 views

How to manipulate lists of parameters?

Suppose I have a function of a variable f, depending on some other parameters a and b, for ...
0
votes
1answer
80 views

Plotting two-variable function as function of one variable with manipulate for both variables

I have a function g(x,y) and would like to plot it as g(x) with a slider to vary y. What I currently have is a g(x,y) plotted as g(x) but with y as a parameter which I can adjust: ...
1
vote
1answer
131 views

combining manipulate with “static” plot

Is there a way to show a plot of a "static" function as background for a manipulate panel ? In other words: I have put into a manipulate a trajectory (solution of a system of two differential ...
1
vote
3answers
159 views

Plot parametric solutions using Manipulate [duplicate]

I want to plot the parametric diagram of {y[t],z[t]}, in which I manipulate a parameter, ω, from $[1, 10 \pi]$. Here is what I have attempted, but I can't get a ...
0
votes
1answer
63 views

grid lines in Manipulate plots are not showing up when first rendered?

I have a Manipulate within which the plot does not render completely initially: ...
-1
votes
2answers
104 views

Plotting solutions of differential equations with different parameters

I want to plot x[t], when i manipulate w from 0.1 to 1.5. Here is what I've attempted, which does not work as expected. ...
0
votes
1answer
200 views

How to manipulate some list-plot in Mathematica

I have two separated matrices in the form X[[i*dx,j*dt]] and V[[i*dx,j*dt]] where i & j are integers from (1 to N) & (1 to M). V & X are velocity ...
1
vote
1answer
162 views

Overlaying a Plot within a Manipulate Control Panel

Is there a way to overlay a plot into a blank area of a Manipulate control panel, that will still update according to the controls in the Manipulate function? This is an image of what I have: You ...
1
vote
2answers
168 views

Plotting in the “Manipulate” function - simple coding

Hello Mathematica community, my name is Preston! I have a real quick question that should be easy to answer. Alright, so for a research project that I'm involved it at my university, I need to ...
0
votes
1answer
186 views

Animation of 2 Differential Equations - 1 Independent Variable

I have effectively 1 differential equation that had to be broken up into 2 (max number of steps reached). I have gotten the solutions for both using NDSolve and have plotted each together. Now, I am ...
3
votes
3answers
105 views

Zooming the interval arround $0.333\cdots $, whats wrong?

I'm trying to zoom the interval arround $0.333\cdots$ with: ...
1
vote
1answer
123 views

Filling between quantile ranges

Following code plots Quantiles for a GBM process. ...
2
votes
1answer
108 views
3
votes
1answer
335 views

Combining Two Manipulated Plots Dependent on Same Variables

I need to combine two plots on the same graph to highlight the intersection of the two while being able to manipulate various parameters that are common to both functions. I need to have the slider ...
4
votes
3answers
163 views

PlotStyle with Table

I want to create a plot style with a table and manipulate the variables in the plot style. ...
3
votes
1answer
211 views

Combine a dynamic module with a manipulation

I would like to combine a dynamic module with a manipulation, whilst maintaining the functionality of both. I have tried things like Show and ...
2
votes
1answer
83 views

Manipulating horizontal and vertical 'guidelines'

Is it possible to create an interactive plot that has drag-down / across horizontal & vertical guides a la Illustrator / InDesign? I would like to generate something like this: I would ideally ...
1
vote
1answer
166 views

Problem with manipulation and plot

I want to make my function trace the hypotrochoid through one period of its motion and trying to change the color of the trace, color of the radius, and change the color of the dot on it so I can view ...
3
votes
4answers
266 views

Change all Options of Plot Dynamically

I am trying to make a series of changes in the appearance of the Plot of some function. I am trying to use Manipulate for my experiments. I tried to change the following code ...
2
votes
3answers
230 views

Animation is jerky, but slider is not

When I do the following simple animation (from the book Mathematica Navigator, p. 316) the slider control changes the image smoothly, but when I play the animation it is jerky. Is there anything that ...
4
votes
3answers
223 views

Draw plot with locator & slider

I would like to create a plot whereby both the slider and the locator 'draw' the plot. In the following code, the locator & the slider act independently: ...
1
vote
1answer
109 views

Two-way locator & slider controls

I was wondering whether it was possible to have a two way control system, whereby one could click and drag both the locator (which would in turn move the sliders), AND click & drag the sliders ...
1
vote
1answer
67 views

What's wrong with the following Plot in Manipulate?

I try to show the convolution of a step function and a triangle function is smooth with the following code: ...
0
votes
1answer
88 views

Can a large Grid of 3DListPlots be rotated by a single Dynamic control?

So I have a few hundred plots in a grid, that I thought would be nice to adjust the data view with a Dynamic slider. I'm using Jens solution for the Grid plotting here . Manipulating multiple plots ...
0
votes
1answer
66 views

Manipulate and global assignments [duplicate]

I've a (perhaps too) basic questions that has been bugging me for a while. Manipulate seems to ignore global assignments. For instance the following does not result in the obvious output one would ...
0
votes
1answer
154 views

Can I combine a manipulate plot and a plot of data from a file?

I am fitting a theoretical equation for a complicated curve to some experimentally measured data. As you might be aware, algorithmically quantifying 'goodness of fit' for a complicated curve is ...