Questions on the Manipulate function of Mathematica, a function that allows the interactive manipulation of certain parameters in a Mathematica expression.

learn more… | top users | synonyms

0
votes
0answers
57 views

Given a list of pairs, average the second elements of pairs whose first elements match [duplicate]

Say this is my list: mylist={{1,4},{1,6},{1,11},{2,12},{2,14}} I want to do an operation that looks at the first element of each pairs, and for all those that ...
2
votes
1answer
77 views

Alternate controls in manipulate

Is there a way to have two controls that govern a single variable in a Manipulate? Specifically, I am using a Locator to select an {x,y} coordinate, but I would also like the user to be able to ...
1
vote
2answers
132 views

Manipulate wrapping ParametricPlot3D - part spec longer than depth of object?

I have a system of parametric equations s0 = {t0, 0. +2. Sin[θ] Sin[ϕ]-1. (0.5 t0+0.5 Sin[θ] Sin[ϕ]), 4. (0. +0.25 Cos[θ] Sin[ϕ]), 1. Cos[ϕ]} If I plot them ...
8
votes
5answers
496 views

How to save Manipulate bookmarks permanently?

I would like to save current Manipulate parameter values to load them again later. Bookmarks (previously discussed here and here) work fine until the cell is ...
1
vote
1answer
98 views

intersection of two lines with a slope slider

I am trying to build an IS/LM model with sliders for a few things including the slope of the IS curve. I am stuck getting the equilibrium ticks and dashed lines to properly follow the intersection of ...
1
vote
1answer
166 views

Use of Manipulate in CDF documents

I am trying to publish a cdf document, but I'm having some problems with the function Manipulate with this code: ...
1
vote
1answer
131 views

combining manipulate with “static” plot

Is there a way to show a plot of a "static" function as background for a manipulate panel ? In other words: I have put into a manipulate a trajectory (solution of a system of two differential ...
1
vote
3answers
159 views

Plot parametric solutions using Manipulate [duplicate]

I want to plot the parametric diagram of {y[t],z[t]}, in which I manipulate a parameter, ω, from $[1, 10 \pi]$. Here is what I have attempted, but I can't get a ...
2
votes
2answers
81 views

Placing some controls above and some below plot

The code below is something I wrote quickly to simulate the problem I'm having with more complex code. I use Row (or Grid) to get the first 2 manipulate variables (a and b) on one line above the plot ...
2
votes
1answer
54 views

Choose partition of a set with Manipulate

Suppose I have a set represented by an array of strings, like set = { "A", "B", "C", "D", "E", "F" } I would like to create a Manipulate which allows the user to build repartitions of the set. ...
0
votes
1answer
63 views

grid lines in Manipulate plots are not showing up when first rendered?

I have a Manipulate within which the plot does not render completely initially: ...
-1
votes
2answers
104 views

Plotting solutions of differential equations with different parameters

I want to plot x[t], when i manipulate w from 0.1 to 1.5. Here is what I've attempted, which does not work as expected. ...
1
vote
0answers
56 views

Problems with manipulating plot in a dialog

G'day, guys. Here is a silly problem I am struggling with. ...
0
votes
2answers
90 views

Problems with Manipulating a piecewise function

I'm having problems with changing some parameters with "manipulate" in a piecewise function. The code i'm working with is: ...
0
votes
1answer
97 views

Why do InputFields not respond in Manipulate utilizing FindGeometricTransform?

In the following code changing the InputField does not result in observing changes in a result from FindGeometricTransform, but ...
1
vote
1answer
89 views

Manipulates Behaving Badly--Why is it autoupdating?

In working on a simple simulation I came across the following Manipulate quirk (bug?) and I want to know how to get around it. Here is the first pass code, which acts as expected (but is incorrect): ...
4
votes
2answers
139 views

How to change start and end date of DateListPlot with Manipulate?

Let's say I have a one dimension list d with length L. The $x$-axis in the plot starts from ...
1
vote
1answer
176 views

How Manipulating a matrix and a graphic in only one Manipulate? [closed]

I have to manipulate a matrix and graphics in one big Manipulate-Block. This way: Manipulate[Matrixform[mat],Graphics3D[]] How can I achieve that? Ok, here my ...
1
vote
1answer
77 views

Increase Size of InputForm in Manipulate

I would like to set a variable equal to a copy n' pasted list, all within the Manipulate[] environment: Manipulate[list,{list,0}] I would like to view and edit ...
3
votes
2answers
190 views

Export in Manipulate, infinite loop

I want to make export of a plot inside Manipulate, but only once. However, this code runs infinitely and does export infinitely: ...
3
votes
1answer
150 views

How can I selectively trigger computations in Manipulate?

I have a Manipulate that uses RandomVariate and Random that I would like to have redraw and ...
2
votes
1answer
88 views

Is it possible to create a manipulate control with lower and upper value

I'm trying to create a manipulate controller to set four value. High and low temperature for both test and use conditions. The four values then go into a calculation. I can set these as four ...
2
votes
1answer
79 views

Change locator object appearance inside Manipulate

I have read earlier discussions of changing Locator appearance in Manipulate. I would like to change the rendered size of the locator object based on one of the manipulate variables. I can't get ...
2
votes
1answer
122 views

Trouble using If[] within TabView Manipulate control

If I place an If in the "body" of a Manipulate as in: ...
1
vote
1answer
87 views

TabView switches tab number without user input in first evaluation

I've attempted to use TabView in a Manipulate to display sets of controls and alter a "display" associated with each set of ...
0
votes
0answers
36 views

Using Manipulate, how do you display the points on the curve and the tangent vector? [duplicate]

I'm new to Mathematica and my assignment is very vague... I'm hoping someone can explain to me a bit more of that this quesion means: Given the curve C, display the point on the curve and the ...
3
votes
1answer
68 views

How can I terminate a running computation in Manipulate?

I want to make a simple cdf file that makes some hard computations inside Manipulate. Is there a simple way, lets say using a "stop!" Button, to terminate the time consuming calculations--without ...
11
votes
3answers
542 views

Logarithmic slider

Is it possible to create a logarithmic slider similar to this one that responds to a change of the variable value? That is, when the slider is moved, the variable value should update. When the ...
0
votes
2answers
109 views

trouble with Dynamic range in SetterBar

It appears that I can set the range to a Dynamic variable in a Manipulate control, but not in a ...
0
votes
1answer
72 views

Why does initialization slow down manipulate in this case?

I'm trying to manipulate a plot of function with some parameters. The function is a long expression, so I tried to put it inside the Initialization options of ...
4
votes
2answers
105 views

Anchor Manipulate Controls to Edges of Content

I'm running into an issue with arranging Manipulate controls and a dynamic module around the content pane of the Manipulate. For example: ...
0
votes
1answer
200 views

How to manipulate some list-plot in Mathematica

I have two separated matrices in the form X[[i*dx,j*dt]] and V[[i*dx,j*dt]] where i & j are integers from (1 to N) & (1 to M). V & X are velocity ...
0
votes
0answers
51 views

Manipulate: After Changing view of a Graphic, the sliders can't be used anymore

I have a new problem: I have exported my program as a cdf standalone. I changed the view of the graphic and now the sliders cant be used anymore. Very strange... Here is a screenshot: The orange ...
4
votes
4answers
230 views

Using Locators in a non-standard Manipulate code

I'm trying to adapt Nasser's method for using a control variable inside Manipulate to selectively choose what part of the code should be recalculated depending on the controls changed (see this ...
2
votes
2answers
54 views

Avoiding RandomVariate update with use of Locator

I am preparing an activity that simulates the response from a noisy spectrometer. The function I use to generate the data has the form: ...
1
vote
1answer
121 views

Get the correct position of a label on a vertical gauge

I am trying to have the value for a vertical slider display next to the indicator arrow for a vertical slider. However, my attempt is slightly wrong; the coordinates are scaled to the entire frame of ...
1
vote
1answer
94 views

How to place a matrix under controls (sliders) in a Manipulate?

I want to know how I can place a matrix under my sliders. Here is my code: ...
1
vote
4answers
86 views

initialize Manipulate with different selection

Is it possible, and if so, how, to initialize the value of h when the value of g is changed, in the following Manipulate: ...
4
votes
2answers
159 views

Manipulate Controller - Simplex

Imagine you have three numbers a, b and c, and using ...
2
votes
3answers
126 views

Slider resistance and Play-Pausing with Manipulate, TabView, and attempt an granular TrackedSymbols?

Attempting to implement @Nasser's answer for How to avoid an expensive subset of a Manipulate computation when dependent variables have not changed?, using a ...
1
vote
2answers
168 views

Plotting in the “Manipulate” function - simple coding

Hello Mathematica community, my name is Preston! I have a real quick question that should be easy to answer. Alright, so for a research project that I'm involved it at my university, I need to ...
0
votes
0answers
32 views

Move the Animation Controls in a Manipulate Slider [duplicate]

Quick formatting question: How can I move the animation controls for a slider from underneath it to say, on the side? For example, I have this: But I would like all of those controls to be on the ...
4
votes
1answer
163 views

'Play' button in Manipulation and slow evaluations

I'm trying to create animation of some discrete process using Manipilate: ...
1
vote
1answer
146 views

Using Manipulate with a control variable for selective recalculation

I'm trying to adapt Nasser's method for using a control variable inside Manipulate to selectively choose what part of the code should be recalculated depending on the controls changed. I've also read ...
9
votes
2answers
218 views

How to avoid an expensive subset of a Manipulate computation when dependent variables have not changed?

I have a Manipulate where a portion of the calculation that ends up displayed is dependent on a subset of the Manipulate control ...
3
votes
2answers
199 views

How to make slider in/visible in Manipulate?

I need your help with making a slider invisible and visible in a Manipulate. Here is my code: ...
1
vote
1answer
97 views

In a manipulatable graph, display x values of all intersections with one of the lines?

I'm doing a project about Moore's law, I'm trying to create a graph that which you can manipulate, but I want the x-values of the intersections with one the lines to be displayed; how would I go about ...
0
votes
1answer
186 views

Animation of 2 Differential Equations - 1 Independent Variable

I have effectively 1 differential equation that had to be broken up into 2 (max number of steps reached). I have gotten the solutions for both using NDSolve and have plotted each together. Now, I am ...
3
votes
3answers
105 views

Zooming the interval arround $0.333\cdots $, whats wrong?

I'm trying to zoom the interval arround $0.333\cdots$ with: ...