1
vote
1answer
80 views

Behaviour of OutputResponse in ListLinePlot

Ok, I think this is not the best way to do this, so I'm open minded for every suggestion doing it in a better way. The Question is why does ListLinePlot not plot ...
7
votes
3answers
304 views

1D quasicrystal: points on a line nearest to points on a lattice

I have a simple lattice / line manipulation: ...
1
vote
1answer
58 views

Functions defined via inverse Laplace transform - plotting issue [closed]

I need to define a function $k(t,c_1,\alpha_1,c_2,\alpha_2)$ in the following manner: ...
0
votes
2answers
110 views

How to manipulate lists of parameters?

Suppose I have a function of a variable f, depending on some other parameters a and b, for ...
0
votes
1answer
65 views

Plotting two-variable function as function of one variable with manipulate for both variables

I have a function g(x,y) and would like to plot it as g(x) with a slider to vary y. What I currently have is a g(x,y) plotted as g(x) but with y as a parameter which I can adjust: ...
1
vote
1answer
103 views

combining manipulate with “static” plot

Is there a way to show a plot of a "static" function as background for a manipulate panel ? In other words: I have put into a manipulate a trajectory (solution of a system of two differential ...
1
vote
3answers
135 views

Plot parametric solutions using Manipulate [duplicate]

I want to plot the parametric diagram of {y[t],z[t]}, in which I manipulate a parameter, ω, from $[1, 10 \pi]$. Here is what I have attempted, but I can't get a ...
0
votes
1answer
42 views

grid lines in Manipulate plots are not showing up when first rendered?

I have a Manipulate within which the plot does not render completely initially: ...
-1
votes
2answers
74 views

Plotting solutions of differential equations with different parameters

I want to plot x[t], when i manipulate w from 0.1 to 1.5. Here is what I've attempted, which does not work as expected. ...
0
votes
1answer
106 views

How to manipulate some list-plot in Mathematica

I have two separated matrices in the form X[[i*dx,j*dt]] and V[[i*dx,j*dt]] where i & j are integers from (1 to N) & (1 to M). V & X are velocity ...
1
vote
1answer
128 views

Overlaying a Plot within a Manipulate Control Panel

Is there a way to overlay a plot into a blank area of a Manipulate control panel, that will still update according to the controls in the Manipulate function? This is an image of what I have: You ...
1
vote
2answers
137 views

Plotting in the “Manipulate” function - simple coding

Hello Mathematica community, my name is Preston! I have a real quick question that should be easy to answer. Alright, so for a research project that I'm involved it at my university, I need to ...
0
votes
1answer
144 views

Animation of 2 Differential Equations - 1 Independent Variable

I have effectively 1 differential equation that had to be broken up into 2 (max number of steps reached). I have gotten the solutions for both using NDSolve and have plotted each together. Now, I am ...
3
votes
3answers
103 views

Zooming the interval arround $0.333\cdots $, whats wrong?

I'm trying to zoom the interval arround $0.333\cdots$ with: ...
1
vote
1answer
104 views

Filling between quantile ranges

Following code plots Quantiles for a GBM process. ...
2
votes
1answer
100 views
3
votes
1answer
156 views

Combining Two Manipulated Plots Dependent on Same Variables

I need to combine two plots on the same graph to highlight the intersection of the two while being able to manipulate various parameters that are common to both functions. I need to have the slider ...
4
votes
3answers
147 views

PlotStyle with Table

I want to create a plot style with a table and manipulate the variables in the plot style. ...
3
votes
1answer
166 views

Combine a dynamic module with a manipulation

I would like to combine a dynamic module with a manipulation, whilst maintaining the functionality of both. I have tried things like Show and ...
2
votes
1answer
73 views

Manipulating horizontal and vertical 'guidelines'

Is it possible to create an interactive plot that has drag-down / across horizontal & vertical guides a la Illustrator / InDesign? I would like to generate something like this: I would ideally ...
1
vote
1answer
145 views

Problem with manipulation and plot

I want to make my function trace the hypotrochoid through one period of its motion and trying to change the color of the trace, color of the radius, and change the color of the dot on it so I can view ...
3
votes
4answers
246 views

Change all Options of Plot Dynamically

I am trying to make a series of changes in the appearance of the Plot of some function. I am trying to use Manipulate for my experiments. I tried to change the following code ...
2
votes
3answers
174 views

Animation is jerky, but slider is not

When I do the following simple animation (from the book Mathematica Navigator, p. 316) the slider control changes the image smoothly, but when I play the animation it is jerky. Is there anything that ...
3
votes
3answers
194 views

Draw plot with locator & slider

I would like to create a plot whereby both the slider and the locator 'draw' the plot. In the following code, the locator & the slider act independently: ...
1
vote
1answer
95 views

Two-way locator & slider controls

I was wondering whether it was possible to have a two way control system, whereby one could click and drag both the locator (which would in turn move the sliders), AND click & drag the sliders ...
1
vote
1answer
60 views

What's wrong with the following Plot in Manipulate?

I try to show the convolution of a step function and a triangle function is smooth with the following code: ...
0
votes
1answer
83 views

Can a large Grid of 3DListPlots be rotated by a single Dynamic control?

So I have a few hundred plots in a grid, that I thought would be nice to adjust the data view with a Dynamic slider. I'm using Jens solution for the Grid plotting here . Manipulating multiple plots ...
0
votes
1answer
56 views

Manipulate and global assignments [duplicate]

I've a (perhaps too) basic questions that has been bugging me for a while. Manipulate seems to ignore global assignments. For instance the following does not result in the obvious output one would ...
0
votes
1answer
112 views

Can I combine a manipulate plot and a plot of data from a file?

I am fitting a theoretical equation for a complicated curve to some experimentally measured data. As you might be aware, algorithmically quantifying 'goodness of fit' for a complicated curve is ...
1
vote
1answer
301 views

Manipulate showing the trajectory of a particle along a parametric curve

I have a particle which follows a certain trajectory given by rx and ry ...
0
votes
1answer
98 views

Counting Stochastic Processes and displaying relative value

Counting Stochastic Processes and displaying relative value I have two watermarks and multiple stochastic processes given. I want both to display and count the stochastic processes which are below ...
0
votes
1answer
233 views

Manipulating and plotting two interdependent functions: [closed]

I want to plot two functions. Function G8 and G9. Both should be manipulable. Function G9 should dependent on Function G8. Function G8 has a bigger starting value. If function G8 increases by δ ...
0
votes
1answer
175 views

Plotting the simulation of Brownian Motions with multiple thresholds

I have the following problem: I have a watermark in this model where not only the mean of all stochastic processes is calculated, but also the mean of those processes which remain beyond a given ...
0
votes
1answer
98 views

Displaying Values of Fuction at end of Period by Grid

My intention is to place the values of two function into a small box within my chart. To be more precise I have two vectors. A meanvector which shows the average value of all simulated stochastic ...
0
votes
1answer
102 views

Stopping- threshold and stopping- time of stochastic processes.

Rod Lm helped me to generate the following code, which I want to extend a little bit. So my intention is to use the threshold (the green line) as boundary in the following way: as soon as the process ...
0
votes
1answer
183 views

Brownian Motion with stopping threshold

I just want to generate one stochastic process, whereas I want to be able to manipulate the start value and the volatility. Furthermore, the process should stop when it reaches 5 However, as soon as ...
2
votes
2answers
146 views

Restarting an Animate[] animation after variable in Manipulate[] changes

I've been trying to restart an animation after variables change from Manipulate PopUpMenus. My animation takes the form: ...
6
votes
2answers
483 views

Manipulating plot of random iterated function system fractal

I'm generating the Sierpinski Gasket by implementing a chaos game in mathematica. What I'd like to do is create an interactive manipulation with a slider, whereby moving it forward, plots all the ...
0
votes
3answers
132 views

Evaluation in Manipulate [duplicate]

I have an expression assigned to a variable. For example: exp1 = a*x+b Now I would like to plot it using something like this ...
9
votes
2answers
360 views

Simple problem with Manipulate and Plot

Would anyone have an idea why the following doesn't work: rule = {z -> x^2 + 2 x + y}; Manipulate[ Plot[z /. rule, {x, 0, 10}], {{y, 2, "y"}, 1, 5} ] But ...
0
votes
1answer
221 views

How to manipulate a Fourier sine series?

I would like to plot the Fourier sine series for $f(x) = x$. I would like to manipulate the parameter n from $0$ to $10$ and plot the sine waves over $(0,1)$. My ...
2
votes
3answers
583 views

Plotting heat equation in a Manipulate expression

I have a 2D heat equation $u_t = \alpha (u_{xx} + u_{yy})$ with conditions: $u(x, y, 0) = 300$, $u_y(x, 0, t) = \mu_1(x)$, $u_y(x, 1, t) = \mu_2(x)$, $u(0, y, t) = \mu_3(y)$, $u(1, y, t) = ...
0
votes
2answers
531 views

How to manipulate plot range with fixed axes

I want to achieve something like this Manipulate[Plot[Sin[x], {x, 0, r}, PlotRange -> {{0, 10}, {-1, 1}}], {r, 0.1, 10}] but my function in place of ...
4
votes
1answer
181 views

Manipulate a Plot that contains a variable that contains symbol [duplicate]

This snippet mm = m Manipulate[{mm, Plot[mm x, {x, 0, 1}]}, {m, 0, 1}] (m is not defined anywhere) produces a sadly fixed ...
3
votes
1answer
64 views

Restricting a plotted expression to reals in a Manipuate

I have an expression from which I'm trying to create a plot that I can manipulate. The expression contains Abs, and I only want to have it evaluated for reals. What ...
1
vote
1answer
395 views

Use Results from Manipulate Plot NDSolve to create another plot versus variable used in DE

I created my plot using using this input: ...
4
votes
3answers
205 views

How to control the speed in Manipulation

As the title says, I want to control the speed when I use Manipulate. I have the following piece of code ...
3
votes
2answers
176 views

Click on a curve to start Manipulating another function

I'm able to plot two lists with a tooltip on the curves to display the name of the curve: ...
4
votes
1answer
102 views

How can I highlight the vanishing-partials in an interactive 3D plot?

I am using Manipulate and Plot3D to plot a function with two real variables and two extra parameters. ...