Tag for questions about bitmapped graphics, particularly those using the Image function.

learn more… | top users | synonyms

4
votes
3answers
423 views

Slow image manipulation

This is some extremely simple code that shows an image and manipulates a circle (that will be used to select a region of the image to analyze). All those Dynamics ...
4
votes
3answers
224 views

Displaying a small histogram overlay on a large image

I needed to overlay a small histogram onto a large image, specifically in the bottom right hand corner. However, I could not do this in an intuitive and computationally cheap fashion due to ...
0
votes
1answer
268 views

How Can I Transform a Colored Image into Pre-defined Matrix?

I am new to Mathematica and I would like to use it to postprocess some of the experimental data I measure. I would like to visualize voltage measurements over a non-uniformly segmented plate. I would ...
3
votes
1answer
166 views

Exporting large png results in completely black image

When trying to export an Image as PNG the resulting file is a completely black image. This happens only for certain images I have not been able to determine exactly ...
3
votes
3answers
233 views

Is there a fast method of generating a Standard Deviation image from a frame stack?

Imagine I have a stack of image frames, $(f_1, ..., f_N) \in F$, where each $f_i$ has the same set of $(x,y)$ dimensions. Using these frames, I'd like to create an image where each pixel in the image ...
1
vote
1answer
429 views

Problem with Fourier and InverseFourier function

I have the following code Image[img, ImageSize -> 300] data = ImageData[img]; fdct = Fourier[data] tdata = InverseFourier[fdct]; Image[tdata] but it seems to ...
1
vote
3answers
223 views

Defining a polygon by clicking on an image [duplicate]

Imagine I have some image, $I$, and I'd like to define a polygon by sequentially clicking on the image to define vertices $(v_1, ...) \in V$, where vertices $v_i$ and $v_j$ share an edge if $j = ...
-2
votes
1answer
4k views

Determine the 2D-Fourier transform of an Image

I am new to Mathematica and using Version 8.0. I want to calculate the 2D-Fourier Transform of a digital image and see its Magnitude and Phase Spectrum, and reconstruct it.
2
votes
2answers
298 views

Intersection & Complement operations for lists of Morphological Components?

I have an array of $M$ sets of morphological components corresponding to the same image, however computed in different ways. For example, we might have: ...
1
vote
1answer
308 views

Selecting morphological components, of a certain size, centered on points of interest in an image

I have a set of points in an image, for example: ...
16
votes
1answer
926 views

Slow import of multigigabyte TIF image stacks

Update 6: After contacting Wolfram Technical Support, I was advised that the frame-to-frame import timing variability can be eliminated by reading in the frame stack from frame to frame with the ...
1
vote
2answers
235 views

Why is Text in an Image cut off?

I want to create a long, skinny Image containing only text. This makes a square image of the default size. ...
7
votes
2answers
364 views

Colorize and the Four-Color Theorem

We can write: MorphologicalComponents[image] // Colorize To assign a random set of colors to each component in some image. The example used for reference by ...
1
vote
0answers
89 views

Using Dynamic to import the chronologically newest file in a directory [duplicate]

Imagine that I have a device continually and sequentially saving files to a specified directory on a Windows machine (such as [E:\ExampleDir]). Call this device a camera with some proprietary drivers ...
2
votes
2answers
210 views

Lossless TIFF or PNG export

I'd like to export an output from MatrixPlot[], however, the output file size seems to depend on my specification of the ImageSize -> {..., ...}. How might I export a TIFF with all of the data in the ...
1
vote
1answer
82 views

Make the linked images show well?

Cell[TextData[{ "(16) ", ButtonBox["[images]", BaseStyle->"Hyperlink", ButtonData->{"http://i.stack.imgur.com/gHWby.png", None}]}], "Text"] After click ...
1
vote
1answer
207 views

Plot image function together maintaining compatibility between their coordinate systems?

Is it possible to plot an image, i.e., draw it's pixels against usual coordinates? My goal is to plot my image and my function in the same coordinates. Update I drew an image of size ...
3
votes
2answers
531 views

How can I put an image on a surface [duplicate]

I want to paste an image on the surface of a 3D plot. For example consider this image which I want to paste on the surface of this sphere ...
0
votes
1answer
304 views

Reverse after ImageData? [duplicate]

Why should we do a Reverse on the image data after an ImageTake ? For example: ...
1
vote
1answer
142 views

How to copy an image given as a GraphicsBox expression to the clipboard?

I have a GraphicsBox expression encoding an image. I need to copy this image to the clipboard so that it can be inserted in a Microsoft Word document. When I invoke ...
5
votes
1answer
260 views

How to convert an image to a compressed string representation equivalent to one copied to clipboard by `CopyToClipboard[image]`?

In my recent question I asked How to embed an image into a string? The suggested solution was ...
1
vote
1answer
128 views

How can I make images in the cell auto-adjust to some fixed-size

There is one auto-adjust item in the right-click menu of image in cell. And other related items are actual size and ...
5
votes
3answers
421 views

Getting RGBA data from an image

What is going on with returned data in the following examples? It appears ImageData returns different types depending on the what data is passed into ...
0
votes
0answers
197 views

Behavior of copy and paste with different image formats

Ok, let's say I create a 1x1 pixel image. i = Image[{{0}}, "Byte"]; Now I Export["image.png", i] the image and import it into ...
1
vote
1answer
160 views

How to get path and file name of a pasted image?

Say in Documentation Center -> ImageData -> EXAMPLES -> Basic Examples you find an image of a planetary body (Mars?). Can one obtain the file source for this image wich is copied into a Mathematica ...
25
votes
7answers
3k views

Embed Code Into Image

I often export images(plots, matrix, arrays, etc..) from mathematica which I end up putting in word documents or uploading to the web. The problem is that I often lose the original code and I am left ...
21
votes
4answers
3k views

How can I detect an ellipse in a photo?

I tried to detect the rim of the following cup as an ellipse. I've tried the solutions given in How to find circular objects in an image? to detect the ellipse, but the detection result was not ...
13
votes
2answers
530 views

Sharp background image in plot

How do I get rid of blurry transitions between pixels of the background image below. It's the fault of Texture[], previously discussed in this answer. I haven't ...
3
votes
1answer
172 views

Resampling when using image as Texture

How to get sharp pixel boundaries with Texture? I'd like to have only black/white in the example below, no gray. ...
2
votes
2answers
762 views

How can I import images from a Microsoft SQLServer database?

I have a table with binary data (images) in Microsoft SQlServer. I want to import that data and convert it into Image format. I wrote the following code, but it's ...
3
votes
1answer
936 views

Detection of horizontal lines in an image

Ok I'm trying to detect horizontal lines in an image. But the problem is that the line is quite obscure. So I'm not sure if it is even possible to extract that. I tried many different filters, but ...
5
votes
4answers
502 views

How can I return the color at a coordinate in an image?

I have an imported and cropped image: TestPicture = Import["filepath.jpg"]; TestPictureCropped = ImageCrop[TestPicture, Min[ImageDimensions[TestPicture]]]; How ...
7
votes
3answers
508 views

Combining Image3D and Graphics3D

I want to combine an Image3D and a Graphics3D using Show. Here is the code: ...
11
votes
3answers
3k views

Composing an image with a plot

I'm trying to illustrate the solutions to a textbook problem dealing with quadratic functions. This will involve plotting a quadratic and overlaying the plot and the image. Here is the textbook ...
3
votes
1answer
183 views

NetLink Exporting Images doesn't work (Unknown string escape)

Exporting Image files (intermittently) doesn't work: I get messages back indicating the error is to do with escaping characters: ...
5
votes
1answer
134 views

Scaling an image with “Drawing Tools” primitives on it

Imagine I doodle with the "Drawing tools" pen, or place lines on an image after importing it. Now say I want to scale this image by some constant factor $C$ while maintaining the same aspect ratio. ...
2
votes
2answers
333 views

Introduction of bias during brightness and contrast manipulation of an image

Quoting from Nature magazine's "Image integrity" guidelines: Processing (such as changing brightness and contrast) is appropriate only when it is applied equally across the entire image and is ...
4
votes
2answers
317 views

Mathematica averaging a big list of large images

I have a list of several hundred images, and I want to average the list to get a single image. Each image is 12bit TIFF with 2048*2048 pixels, and I am using the following to do the job: ...
14
votes
2answers
274 views

SaveDefinitions->True changes the displayed image

Bug introduced in 9.0.1 or earlier and persisting through 10.1.0 or later I have a Manipulate[ ] that displays an image with a superimposed ...
5
votes
2answers
136 views

Problem with Raster and custom ColorTable

Context Let me define two colour tables: (which come from brewer and xmedcom respectively) ...
7
votes
2answers
307 views

Using a given colour table with Image?

Context I would like to represent large images with a given colour table. Now, if I use Image ...
15
votes
2answers
3k views

How can I detect a rectangular region of interest in a picture?

Here is a downsampled input image I converted to greyscale. To select the rectangular region of interest we first preform preprocessing: ...
28
votes
5answers
1k views

Voronoi diagrams for generators other than points

Any suggestions how to determine Voronoi diagram for sites other than points, as e.g. in the picture below? Input is a raster image.
6
votes
1answer
138 views

How can I keep a plot's filled area from obstructing other lines when exported as EPS?

I am plotting several functions, some of which have fillings. After I combine all the functions together on a plot and export the plot to an EPS file, the fillings obstruct other lines. Exported PDF ...
0
votes
0answers
103 views

How do I get a plot with a certain size? [duplicate]

I am currently creating a poster for a conference in Scribus. I have a given space on the poster for a plot that I want to create with Mathematica. I don't want to scale in in Scribus, as this would ...
13
votes
1answer
310 views

High memory use while exporting a BMP

Something mysterious is going on when exporting images. I'm using Mathematica 9.0.1 on Windows 7 (64 bit), and find that the memory use is excessive when exporting to a bmp. But it doesn't happen ...
11
votes
1answer
386 views

Precise cropping with ImageCrop

The built-in ImageCrop function "effectively removes borders from image whose pixel value distribution is almost uniform" (emphasis mine). I need an efficient ...
6
votes
1answer
186 views

Estimate Imagesize of any given Particular Control object?

I make different controls(InputFields,Text,panel, etc) in my code for which the corresponding code is below. ...
5
votes
1answer
567 views

Volumetric analysis from topological maps

I want to calculate the volume of fill required to level an area about the size of three foodball fields. The Department of Public Works in my city can provide me with topo data for the area. Their ...
3
votes
1answer
298 views

Filter bright dots from the gradient of the image

I am wondering how to filter out bright dots in the picture, which are caused by background noise. I have used gradient filter in mathematica but it doesn't help. Is there anyway, that I can plot ...