Questions about how Mathematica evaluates expressions, tracing evaluation (Trace*), handling expressions in unevaluated form (Hold*, Unevaluated), nonstandard evaluation, etc.

learn more… | top users | synonyms

0
votes
1answer
402 views

Make Mathematica wait before replacing?

How can I force Mathematica to completely evaluate a subexpression before using a replacement rule? For example, consider the following definition (for the series of ...
5
votes
1answer
155 views

how to print stack trace when TimeConstrained times out

According to the documentation, TimeConstrained generates an interrupt which interrupts the computation. This interrupt is treated just like an abort, at least in ...
23
votes
2answers
470 views

Evaluation of OptionValue[]

I have a function that takes an OptionsPattern and I want to access several options, say a, and ...
0
votes
1answer
930 views

Array of functions, evaluation in plot

I would like to create two arrays of functions yfunc[[i]] and tfunc[[i]], with each entry of those functions being a function ...
8
votes
1answer
146 views

How to catch the “Preemptive” evaluations from within the main loop?

When trying to make an optimized version of my plotRange fonction I faced a problem of catching the "Preemptive" evaluations ...
4
votes
0answers
87 views

Problem with inequality using refine

I am using inequalities to follow some line of reasoning in Mathematica and I came across a problem I can not explain to myself. Does from a>=0 and b>=0 not follow a+b >= 0? How does Mathematica ...
7
votes
4answers
267 views

Button's command is not evaluated in iteration

I wish I didn't feel like a newbie after several months, but... If I enter the following: Table[ Button[ "Number: " <> ToString @ i, Print @ i], {i, 1, 5}] ...
5
votes
2answers
386 views

Problem with ParametricPlot of multiple Curves

I have written a function f[Ne,t,T], that gives back a list of results when evaluated with numeric values of the variables Ne, ...
0
votes
0answers
60 views

How to ContourPlot a Table? [duplicate]

Possible Duplicate: Why is ContourPlot not displaying this curve? Why do I have to put Evaluate[] here I'm trying to plot certain contours of a function $f:\mathbb R^2\to\mathbb R$. What I ...
2
votes
3answers
160 views

Function to preserve evaluation on display?

I'm looking for a function that applies the following behavior to an expression: -When the expression is given as the full input, or as part of a function that cannot be evaluated, it remains in ...
1
vote
2answers
168 views

Why does Evaluate[a[[1]]]=0 assign a value to a variable while a[[1]]=0 doesn't?

I'm trying to do a small page counter with Mathematica, for leting me know about my reading progress on some books. I'm stuck on a problem: ...
5
votes
1answer
224 views

Why does Dynamic output cause CPU usage when onscreen?

I write such a line in Mathematica: {Slider[Dynamic[s]], Dynamic[f[x_] := s*x]} After evaluation, the CPU immediately runs at full power. And if you scroll the ...
12
votes
2answers
500 views

Preventing Numerical value from being evaluated

I have searched stackoverflow (and comparable pages) for quite a while now (got redirected from there to this specialized stack), and I surrender. I am trying to evaluate an expression that is small ...
4
votes
2answers
365 views
9
votes
1answer
106 views

Different behaviour of ValueQ inside and outside of a loop

I need to store a rather big number of variables and I tried to do that by storing each variable as Z[n] with varying n. I guess this was not my best idea. The first problem I encountered is when I ...
11
votes
2answers
276 views

can a ColorFunction have side effects?

Can anyone explain this (to me) odd behavior. If I run this code once (fresh kernel) it works as intended. ...
20
votes
1answer
1k views

How can I set a keyboard shortcut to run a command?

I want to use this to add a keyboard shortcut to an undo function I wrote. The basic problem is the following: I have a command, let's say x=1, and I want to run ...
11
votes
1answer
518 views

Get the name of a symbol passed to a function

I'm trying to get the name of a symbol passed to a function with this: f[x_] := {SymbolName[x], x} SetAttributes[f, HoldFirst] x = 5; f[x] But ...
8
votes
2answers
192 views

Obtain input expression from history without evaluating

I typed and evaluated an expression, but deleted it from the notebook. For instance, suppose it was In[1]:= Round@SessionTime[] Out[1]= 2 I now want to retrieve ...
10
votes
3answers
350 views

Why does ++++x return an increment of 2 when the value of x is only incremented by 1?

This line returns 3: x = 1; ++++x However, the value of x after the increment is only ...
4
votes
3answers
226 views

How can I create a custom control which evaluates to a list of values or replacements?

I have a set of variables which are used in various places in my calculations (solving a system, initial conditions, etc.). In order to make this easier to deal with, I want to make a control-like ...
3
votes
1answer
409 views

Why can't Mathematica parallelize this?

The following code makes mathematica print "ParallelTable::nopar1: [...] cannot be parallelized; proceeding with sequential evaluation." ...
9
votes
1answer
148 views

Prevent Plus from threading InterpolatingFunction

For an InterpolatingFunction $y:\ \mathbb{R}\to\mathbb{R}^2$, Plus is unaware of this, so when I do any modifications to it in ...
2
votes
2answers
177 views

Updating a tracked symbol inside Refresh?

I have some code inside a Manipulate, whose goal is to allow the user to edit the upper half of the matrix while keeping it symmetric at all time. The minimal code ...
7
votes
2answers
9k views

Simple ways to evaluate a derivative at a point?

The contrast in behavior between, say, f[x_] = Sin[x^2]; f'[2] vs. u[x_, y_] = Cos[x + y^2]; has always bothered my ...
15
votes
2answers
301 views

How can I access a variable in one evaluator from another evaluator?

I have two notebooks, each with a different kernel. Is there a way to grab the value of a variable in KernelA from KernelB?
2
votes
1answer
136 views

Implementing a For (?) or series or loop (?) for individual results for every x to n

I'm working on improving a modeling formula and have spreadsheets worth of data to use, but my work so far has been quite tedious. I'm essentially pulling 20 rows of data from each separate sheet of a ...
5
votes
2answers
820 views

How to make a function that evaluates an expression?

I'm trying to make a function where the input is an expression, but somehow it just won't be evaluated. For example, this little function doesn't work: ...
5
votes
1answer
462 views

Strange Error in Bifurcation Diagram:

I am attempting to plot the bifurcation diagram of the tent map $$ f(x):=2\alpha \begin{cases} x, & 0<x<1/2\\ 1-x, &1/2<x<1, \end{cases} $$ i.e., the plot $\alpha$ vs. the limit ...
4
votes
1answer
78 views

How can I kill one evaluator from another?

I have a kernel named A in one notebook and other notebook with kernel B, how can I kill B from A?
6
votes
1answer
734 views

Evaluate while external command is being run [duplicate]

Possible Duplicate: Computing Many Slow I/O Operations I'm launching an external command with the Mathematica front end that takes two arguments: ...
4
votes
1answer
137 views

Pre and Post in a Block[]

Why does Block[{$Pre = ( 1 + #) &}, 1] produce 1 while ...
7
votes
1answer
211 views

How can I have interruptible computations inside a manipulate?

Here's a perfect example of my problem: Manipulate[Pause[n], {n, {1, 10}, ContinuousAction -> False}, SynchronousUpdating -> False] It is illustrated by ...
2
votes
2answers
2k views

Animation of Differential Equations from NDSolve with ParametricPlot3D and Evaluate

I have a system of differential equations (referred to as "s") and use NDSolve to obtain the solution. I substitute the interpolated functions for the original ...
0
votes
1answer
72 views

How can I restrict a notebook to evaluate only if I am user 'root'?

I am playing with openCL on Linux with an AMD gpu, and due to a glitch in the driver, I need to be 'root' to get stuff to work. Installation question here.
1
vote
2answers
169 views

How can define a set of nested parameters

I would like to know how I to define a function with a nested set of parameters (or whatever you would like to call it). For example, how would I get the following function ...
5
votes
3answers
264 views

First evaluation fails

I am fairly new to Mathematica (version 7), so please bear with me... I have duplicated, in Mathematica, a program that I originally wrote in C (it generates OEIS sequence A191837). The problem is ...
8
votes
2answers
224 views

Why does the name of a pattern affect the result of a transformation rule?

I was playing a little dirty, trying to get a template for defining a Curl[] operator. I wrote the following rule, which I knew was going to spit out a few ...
1
vote
2answers
108 views

What is the default file path used by the Put function and how do I pre-evaluate an expression to use in Put?

I have a problem of trying to store some output in an external file. In one note book I define a function f[x_]:=AdvancedCalculation, where this function generates ...
0
votes
1answer
173 views

Slow Dynamic Button Does Not Print [duplicate]

Possible Duplicate: Why do buttons with ChoiceDialog freeze the front end? Why is SystemDialogInput failing to return a save file path? Evaluation inside Button stops after some seconds I ...
19
votes
3answers
785 views

How can I completely ban usage of some functions in output and mandate use of others?

For example, I hate that Mathematica uses Pochhammer symbol in outputs and prefer all the expressions in Gamma function. How can ...
4
votes
1answer
133 views

Tweaking Prime[n] to return 1 when n==0

I manually evaluate this cell to set Prime[0] Unprotect[Prime] Prime[0] = 1 Protect[Prime] I manually evaluate this cell to reset Prime[0] ...
14
votes
2answers
367 views

How to make use of NumericQ[x] = True (and use it safely)?

Basic Issue: I'm trying to understand the proper use of NumericQ's "magical" capabilities. Please consider the examples below. Actual question and some links are ...
1
vote
1answer
293 views
15
votes
1answer
368 views

Polynomial expectations of generic distributions

Summary Polynomial expectations depend only moments and cross moments of a multivariate distribution. I would like to use Expectation to compute polynomial ...
8
votes
2answers
209 views

Keywords to find documentation for this syntax

Mathematica allows this syntax, but I cannot find any documentation (or books) that discuss the various uses/advantages of it ...
19
votes
4answers
473 views

Function that caches when it returns unevaluated

How would you go about implementing a function that caches not the result but the fact that it didn't match a pattern? So that it doesn't waste time recomputing a complex time-consuming pattern ...
5
votes
1answer
240 views

Parts of Module body evaluated in external scope?

I have an expression that suggests that some expressions in a module body are dragging in definitions from outside the scope in a surprising way. First, consider a symbolic constant, ...
11
votes
3answers
418 views

How can I hold UpValues but evaluate other expressions?

Consider these definitions: own = "OwnValue"; down[_] = "DownValue"; sub[_][_] = "SubValue"; N[n] = 3.14; _[___, up, ___] ^= "UpValue"; The attribute ...
6
votes
1answer
542 views

Why does Manipulate execute the expression twice?

When I execute Foobar[] in the code below and move a slider, the variable grad is printed twice. Why is this? How can I make the ...