2
votes
0answers
40 views

NDSolve fails to solve vector-valued function x'[t]=a.x[t]+u.b

I get no solution when I run the following command: NDSolve[{x'[t]==0.{{0},{0},{1.}}+{{0,1.,0.},{0,0.,1.},{0.,-0.156816,-0.523512}}.x[t],x[0]=={0,0,0}},x,{t,0,1}] ...
2
votes
1answer
103 views

Simple differential equation to solve

Suppose we have this differential equation: $$ x^2 + y^2 + z^2 = \frac{\frac{\partial y}{\partial x}}{x+y+z}$$ I want to find $\frac{\partial y}{\partial x}$ at x=1,y=1,z=1. I tried this code but ...
0
votes
0answers
39 views

Coupled ODEs with boundary conditions - DSolve Error

I'm relatively new to mathematica and I can't find the error here. I suspect it has something to do with the fact that vx, vy, vz aren't blue on my mathematica - as in, they already have some assigned ...
0
votes
0answers
72 views
0
votes
3answers
158 views

Solving One Equation with Two Variables

I am trying to solve an equation with two variables. It is the last step in the process of using the method of undetermined coefficients to solve a nonhomogeneous differential equation. The equation ...
2
votes
1answer
88 views

Finding the roots of a function with a parameter

I am using a differential equation method for finding the roots of a function. My function is much more complicated but I can illustrate my problem with a trivial example. The problem occurs when ...
0
votes
0answers
63 views

System of differential equations - solving for a constant

I will reformulate my question in the hopes it will be more intelligible. First, I defined the functions: ...
0
votes
0answers
50 views

Can't Solve a system of differential equations, Solve takes too long

My question is probably not really interesting but I really need help on this because I won't have access to a more powerful computer. So my model contains 7 equations : ...
1
vote
0answers
37 views

RSolve works slow and does not give an analytical solution for solving high order linear difference equations

RSolve@@{{a[n]-a[n-10]==101}~Join~Table[a[i+1]==101+10i,{i,0,9}],a[n],n} I want to get the exact form of general formulas, but ...
0
votes
0answers
43 views

Ideas for NDSolve?

I'm currently trying to find a numerical solution to a differential equation of the form: D[W[X], {X, 4}] ==(-(1/(delta + G - (G X)/L)^2) + 1/(delta + (G X)/L)^2) ...
0
votes
1answer
50 views

Dsolve is not solving equation ( 3 system with 2.order diferantial equations) [closed]

I added an image of my equations at the bottom. I dont understand why it is not solving. This is 3 systems with 2.order diferantial equations. I also put my initial conditions. But it is not solving. ...
0
votes
1answer
108 views

Solving System of Nonlinear with Three Differential Equations

I've been trying to solve a system of nonlinear differential equation, but the conditions are a bit weird. Two of the differentials equate to the same equation, but have different boundary ...
1
vote
1answer
139 views

Get Cos[2 x] in “Solve”

My goal is to get an analytical solution of x ( $\lambda$ in the problem), when $\epsilon$ (f[x] in the problem) is maximum (use inverse form). I found that if I can use trigonometric identity ...
4
votes
1answer
136 views

Solving a nonlinear, second order d.e. in Mathematica

I am trying to solve the following differential equation $$ s''(x) = \frac{8}{9}s(x) -2s^2(x) + s^3(x), $$ with boundary conditions $s(-30) = 4/3 $ and $s(30)=0$, in Mathematica by using the following ...
1
vote
1answer
100 views

Solution of Coupled Second Order ODEs with Boundary Conditions

D[Tu1[x], {x, 2}] qu - Tu1[x] (fu0 + I w p) == Tou[x] f1 D[T1[x], {x, 2}] q - T1[x] (f0 - b g0 + I w p)== To[x] (f1 - b g1) - g1 For T1 , ...
0
votes
1answer
142 views

Problem with Plot and ParametricNDSolve

This is my first question on this site, I hope it is written in an understandable way. Let's start. My aim is to plot a certain parametric region, with $x$ and $y$ coordinates given by the following ...
3
votes
1answer
279 views

Solving a differential equation with initial conditions

I want to get a solution to an ordinary differential equation with imposed initial conditions. I'm confused about why my following code doesn't work: ...
1
vote
1answer
113 views

Solution of an ODE in implicit form

For some non-linear ODEs there is only implicit form of solution using DSolve. For example DSolve[(y[x] + x - 1)*y'[x] - y[x] + 2 x + 3 == 0, y[x], x] gives ...
1
vote
1answer
47 views

Invariant error plot for an arbitray system of ODE

i try to use InvariantErrorPlot command for a generic system of ODE but i find only example with pre-building equations from Mathematica Packages. This is one of ...
0
votes
1answer
199 views

NDSolve example - analytical vs numerical solution. How to specify initial conditions?

So, I have the following equation: y[t]^-3 == w^2 y[t]/t^2 + y''[t] where w^2 = (t0 k0)^2. Analytic solution is easy to ...
0
votes
0answers
96 views

Boundary Condition Problem with Green's Function

My temperature distribution looks like: Mean wire temperature is : To[x_] := 2 c1 Cosh[x a1] + a2 And it is continuous at two points. In positive part: ...
0
votes
0answers
31 views

How to Invert a Multivariate Interpolating Function? [duplicate]

I used NSolve on a partial differential equation with boundary conditions to get a numerical solution that Mathematica says is of the form InterpolatingFunction. I then defined a function f(x,y) which ...
-1
votes
1answer
94 views

Solve set of non linear differential equations [closed]

I have set of differential equations. For example, I took two equations and tried to solve them as below. I am not getting any results. Please help me to figure it out the mistake. And I wonder if I ...
1
vote
0answers
86 views

No response from DSolve

Using optimal control theory, I am trying to find the optimal paths of d and k such that they will maximize profit as given by lc: ...
2
votes
1answer
197 views

Resonance Curve using NDSolve

I am trying to make a resonance curve like this one below, using NDSolve. I tried to use code as below. Basically I try to hold solution for a w (driving frequency value) using NumericQ and then ...
0
votes
0answers
133 views

Second-order DSolve overdetermined with only 2 boundary conditions

I was going through some circuit analysis problem and came up with a second-order differential equation, which I decided to solve with Mathematica: $$ L\frac{\mathrm{d}^{2} I}{\mathrm{d}t^{2}} + ...
0
votes
0answers
82 views

Issue with NDSolve

This could be a stupid issue, but I have been checking for ages. I cannot solve this apparently innocuous system of PDEs: ...
0
votes
3answers
276 views

Solving a differential equation with mixed conditions using DSolve

I want to solve a differential equation $$ \frac{d}{dx}\left(k_0 \left(\frac{T(x)}{T_0}\right)^n \frac{dT(x)}{dx}\right)=0,$$ with boundary conditions: $T(l)=T_0$, $\;T'(0)=-\frac{q_0}{k_0 ...
4
votes
5answers
365 views

Problem using WhenEvent to constrain solution

Note: This question has also been posted at the Wolfram Community Problem: Simulate pressure in volume 1 and 2 for 1 second. The circuit is as follows: From this I set up the governing DE for ...
1
vote
0answers
223 views

Differential equations: How do I solve a delay differential equation with 0-1 variables

How do I solve the following non-linear, delay-differential equations using Mathematica under the assumptions $$p(t) = 1 ,\; y(t) > k$$ $$p(t) = 0,\; y(t)<= \ k$$. $$ \frac{dw}{dt} = ...
7
votes
1answer
394 views

Issue with the NDSolve code

With this procedure, one may determine an eigen-value function $R(a)$ for any given $\Xi$ (say 0, 25, 50, 75, 100) ...
4
votes
2answers
106 views

Non-convergance of the solution of the 1+1 partial differential equation

I am stacked with a partial differential equation as follows: This is the $\LaTeX$ expression for the equation $$ \frac{\partial y}{\partial t}=\frac{\partial^2 y(x,t)}{\partial x^2} ...
0
votes
1answer
262 views

DSolve to solve a system of differential equations [duplicate]

I need to solve a system of differential equations as follows: ...
0
votes
1answer
107 views

Manipulating and using result of DSolve

I have an unsightly looking equation that nonetheless has an analytical solution. The solution is ugly as hell, but exists; I use the following code with the DSolve ...
1
vote
1answer
354 views

Singularity / stiffness / precision errors with NDSolve

I have a relatively simple 2nd Order ODE problem I'm trying to solve numerically $p'' + \frac{1}{r}p' = A(\frac{p(r)}{p(r) + k_{m}})$ where $A = 7.5795*10^9$ and $k_{m} = 1$. So trying to get ...
0
votes
0answers
73 views

DSolve is rejecting my description of a system of PDEs

I am trying to solve a system of partial differential equations using DSlove. But i get the input equations in return. Dsolve is not doing anything ...
0
votes
0answers
87 views

Defining a curved region for NDSolve

I have an equation to solve using NDSolve which involves two parameters: $en$ and $k$. The equation produces a set of curves when $en$ is plotted against $k$. In ...
0
votes
1answer
170 views

How to change machineprecision digits

I am trying to compute t0: ...
8
votes
3answers
612 views

Can Mathematica solve this sort of functional/differential equation?

I am looking for differentiable functions $f$ from the unit interval to itself that satisfy the following equation $\forall\:p \in \left( 0,1 \right)$: $$1-p-f(f(p))-f(p)f'(f(p))=0$$ Is there a way ...
0
votes
1answer
66 views

LMS distance from a point to an InterpolatingFunction

I have a short script to NDSolve a second-order nonlinear BVP, which as its output produces an InterpolatingFunction object. I ...
2
votes
1answer
442 views

Nonlinear least squares

I have a typical nonlinear least square problem and it seems very similar to the example provided in the section on parameter fitting at the Wolfram website. Unfortunately I always get some error ...
3
votes
2answers
426 views

FindFit for a differential equation model with multiple variables?

I'm trying to figure out how to use FindFit with a multivariable differential equation model and data. I've successfully made it work for the one-variable version ...
0
votes
0answers
173 views

Defining extra boundary conditions for NDSolve?

I have a second order reaction / diffusion type ODE of the form $\frac{D_{o}}{r^2} \frac{d}{dr}\left(r^2 \frac{dC}{dr} \right) - \frac{aC}{C+k} = 0$ where $a, k$ and $D_{o}$ are constants and $C$ is ...
1
vote
1answer
159 views

Dsolve too slow — is there anyway around?

I am trying to solve: ...
1
vote
0answers
167 views

Having Mathematica solve or help solve a set of 8 equations

There is a set of DDE's that arise in leukemia dynamics and I'd like to find the equilibrium points of the system by setting all of the derivatives equal to zero. The system can be described in ...
4
votes
1answer
174 views

How to demonstrate lack of stability with advection equation

I am trying to that using a coarse grid with an explicit method for, say, the advection equation leads to an unstable solution. The trouble is Mathematica avoids unstable solutions with good ...
2
votes
0answers
151 views

Using WhenEvent for derivative of discontinuous function

I have a discontinuous function ($u(t)$, a square wave) and I would like WhenEvent to trigger when the signal goes high/low, i.e. when the value of $u(t)$ changes. ...
8
votes
1answer
353 views

Complex valued 2+1D nonlinear PDE using NDSolve

I am trying to follow the main ideas presented in this question, applying it to my own problem, which is a complex, time-dependent, nonlinear PDE: $$i \frac{\partial \psi}{\partial t} = \left[ ...
3
votes
1answer
346 views

How to increase Maximum number of steps in any other functions except NDSolve?

I want to plot an output response from a state space model. I use StateResponse[] to calculate it and then plot it. When I run my code, I face this message: ...
1
vote
4answers
255 views

Calculating difference ratios (Δβ/Δρ) from a data set

I am little bit confused about how to calculate δβ/δρ value if I have set of values like this. I have the values of β and ρ like this. ...