19
$\begingroup$

How can I animate a point moving on a triangle's sides?
I can generate a triangle and point, but I have no idea how to define point movement. I'm guessing that I have to use $\sin$ and $\cos$ in coordinates, but I can't find a way to define the triangle in this way.
Can someone help me a bit with that?

point on triangle

$\endgroup$
0

7 Answers 7

22
$\begingroup$

If you interpret your geometric shape as a NURBS of degree 1 (linear), you can proceed with the following, extremely simple code:

pts = {{0, 0}, {1, 1}, {0.5, 1.5}}; (* just an example *)
s = BSplineFunction[pts, SplineClosed -> True, SplineDegree -> 1];
Animate[ParametricPlot[s[t], {t, 0, 1}, Epilog :> {Red, PointSize[Large], Point[s[t]]}], {t, 0., 1.}]

This yields the triangular (outer) graph of the following display:

Same BSplineFunction, but increased degree and custom weights

Just replace Animate by Manipulate to give the user control over the point.

Note This is a rather general approach applicable in wide areas, since you can vary your control points as well as the spline degree, but the BSplineFunction will always yield the curve between arguments 0 and 1. In essence, you can display quite every geometric shape using this approach. For more complex ones, some adjustment to B-spline weights will be necessary, though.

The inner of those curves result from the same control points as before, but degree 2 and weights explicitly given as SplineWeights -> {.1, 1, 1}. Just exchange the s-line above with this one:

s = BSplineFunction[pts, SplineClosed -> True, SplineDegree -> 2, SplineWeights -> {.1, 1, 1}];

I hope this might be of some help to you.

$\endgroup$
9
  • $\begingroup$ Simon, would you consider using a variation of your user name? We have a member of three years using the same name, and though he isn't as active recently it still confuses me when I see you post or comment. (This is merely a suggestion; you are not required to take action.) $\endgroup$
    – Mr.Wizard
    Jan 25, 2015 at 0:33
  • $\begingroup$ Simon might be a rather common user name, I take it. Problem is: I had some problems with my Stackexchange account already, up to the point of having had to contact support for help... I will see what I can do, however, without messing up my account once again. Did I mention, how inexplicably unintuitive the Stackexchange account management is? ;) $\endgroup$
    – Jinxed
    Jan 25, 2015 at 1:14
  • $\begingroup$ @Mr.Wizard: I tried, but Stackexchange won't let me: I will have to wait until some time in February. Maybe you will have become acquainted to my user name until then. Either way: I can't change anything for the moment. :| $\endgroup$
    – Jinxed
    Jan 25, 2015 at 1:20
  • 1
    $\begingroup$ I second @Mr.Wizard because your contributions to the site are very well received. It wouldn't matter if you were the standard "novice new user type", but you aren't. And it's a lame to have that kind of confusion among two good site citizens. Please don't forget to try changing you user name once the site allows you. $\endgroup$ Jan 25, 2015 at 3:20
  • $\begingroup$ Simon, as a community elected moderator I believe I am able to change your user name. If you tell me what you would like I shall attempt it. $\endgroup$
    – Mr.Wizard
    Jan 25, 2015 at 3:45
14
$\begingroup$

Using RegionNearest

This approach should work regardless of whether the triangle is filled or not. Here, we will represent the triangle unfilled, i.e. as a one-dimensional region, r1, a line, embedded in a plane.

r1 = Line[{{0, 0}, {3, 1}, {2, 0}, {0, 0}}];
RegionDimension[r1]
RegionEmbeddingDimension[r1]

1
2

Get the radius of a circle, with the triangle centroid as center, that intersects the farthest vertex of the triangle.

c = RegionCentroid[r1];  (* the gray point *)
radius = Max[EuclideanDistance[c, #] & /@ {{0, 0}, {3, 1}, {2, 0}}];

Animate a black point going around the circle.

And display a (red) point on the triangle that is currently nearest to the black point on the circle.

Animator[Dynamic[n], {0, N[2 Pi], .01}]
Graphics[{r1, AbsolutePointSize[10],
  Gray, Point[c],
  Black, Dynamic@ Point[d = radius {Cos[n], Sin[n]} + c],
  {Red, Dynamic@Point[RegionNearest[r1, d]]},
  {Dashed, Circle[c, radius]}}]

animation2

$\endgroup$
1
  • 4
    $\begingroup$ Unusual in both method and result. +1 $\endgroup$
    – Mr.Wizard
    Jan 25, 2015 at 0:35
13
$\begingroup$

Thanks to kguler, I now know there is something like: LineScaledCoordinate.

vertices = Table[{Cos[i], Sin[i]}, {i, 0, 2 Pi, 2 Pi/3.}];
Needs["GraphUtilities`"]

Slider[Dynamic@t]
Graphics[{

  EdgeForm @ Thick, FaceForm @ None, Polygon @ vertices
  ,
  AbsolutePointSize @ 12, Red, Dynamic[Point[LineScaledCoordinate[vertices, t]]]
  }
 ]

enter image description here


Just in case you can't load GraphUtilities`, use Interpolation:

f = Interpolation[Table[{{i}, vertices[[i]]}, {i, Length@vertices}], 
                  InterpolationOrder -> 1]

Slider[Dynamic @ t, {1, 4}]
Graphics[{
        EdgeForm@Thick, FaceForm@None, Polygon@vertices
        , 
        AbsolutePointSize@12, Red, Dynamic[Point[f[t]]]
        }]

This method is different because each edge has parametric length of 1. If you want uniform "velocity" then you have to take care of {i} in Table.

$\endgroup$
11
$\begingroup$
e = {{0, 0}, {1, 1}, {5.5, 1.5}, {0, 0}}; (*triangle vertices*)

(*point position as a function of time*)
p[t_, e_] := Piecewise[{
    {(1 - t)*e[[1]] + t*e[[2]], 0 <= t <= 1},
    {(1 - (t - 1))*e[[2]] + (t - 1)*e[[3]], 1 < t <= 2},
    {(1 - (t - 2))*e[[3]] + (t - 2)*e[[1]], 2 < t <= 3}
    }];

(*animation*)
Animate[
 Show[
  Graphics[Line[e]],
  Graphics[{Red, PointSize[Large], Point[p[t, e]]}]
  ]
 , {t, 0, 3}
 ]

EDIT (Make the point move at constant speed)

Length of triangle edges:

d = EuclideanDistance[#[[1]], #[[2]]] & /@ Partition[e, 2, 1]

Modified p function so that the point moves at a normalized speed of d[[1]] (i.e., move along the first edge in time equal to $1$)

pver2[t_, e_] := Piecewise[{
    {(1 - t)*e[[1]] + t*e[[2]], 0 <= t <= 1},

    {(1 - (t - 1)/(d[[2]]/d[[1]]))*e[[2]] + (t - 1)*
       e[[3]]/(d[[2]]/d[[1]]), 1 < t <= 1 + d[[2]]/d[[1]]},

    {(1 - (t - (1 + d[[2]]/d[[1]]))/(d[[3]]/d[[1]]))*
       e[[3]] + (t - (1 + d[[2]]/d[[1]]))*e[[1]]/(d[[3]]/d[[1]]), 
     1 + d[[2]]/d[[1]] < t <= 1 + d[[2]]/d[[1]] + d[[3]]/d[[1]]}}];

Animation:

Animate[Show[Graphics[Line[e]], 
  Graphics[{Red, PointSize[Large], Point[pver2[t, e]]}]], {t, 0, 
  1 + d[[2]]/d[[1]] + d[[3]]/d[[1]]}]

enter image description here

$\endgroup$
5
  • 1
    $\begingroup$ Should e be modified to {{0, 0}, {1, 1}, {0.5, 1.5}, {0, 0}} to close the triangle? $\endgroup$
    – bbgodfrey
    Jan 24, 2015 at 18:49
  • $\begingroup$ @bbgodfrey Indeed, thanks for noticing $\endgroup$
    – Stelios
    Jan 24, 2015 at 18:50
  • $\begingroup$ Very simple and clean solution. Is't there a way to make a point move in same speed on all sides? I know that I can adjust t param to slow it down or make it move faster, but it will still change speed on sides. $\endgroup$
    – Dcortez
    Jan 25, 2015 at 13:14
  • $\begingroup$ @Dcortez Please see edited answer for an (probably not elegant) implementation of the constant speed animation $\endgroup$
    – Stelios
    Jan 25, 2015 at 15:28
  • $\begingroup$ Maybe not cleanest but working. Thank you very much for help. $\endgroup$
    – Dcortez
    Jan 25, 2015 at 15:46
4
$\begingroup$

Here is my modest attempt, based on a formula given in this math.SE answer, with a few affine transformations thrown in:

triangle[pts_?MatrixQ, t_] :=
         AffineTransform[{Transpose[{{2, -1, -1}/3, {0, 1, -1}/Sqrt[3]}.pts], Mean[pts]}][
               Sec[t - π (2 Floor[3 t/(2 π)] + 1)/3] {Cos[t], Sin[t]}/2]

pts = {{0, 0}, {1, 1}, {1, 3}/2};
mt[t_] = triangle[pts, t];
tpic = ParametricPlot[mt[t], {t, 0, 2 π}, Frame -> True];

Animate[Show[tpic, 
             Epilog -> {{Directive[ColorData[1, 1], AbsolutePointSize[4]], Point[pts]},
                        {Directive[Red, AbsolutePointSize[8]], Point[mt[u]]}}],
        {u, 0, 2 π, π/12}]

point going around a triangle

$\endgroup$
4
$\begingroup$
Manipulate[
 Graphics[{
   Line[p[[{1, 2, 3, 1}]]],
   PointSize@Large, Red,
   Point[With[{f = Floor[i], t = FractionalPart[i]}, {1 - t, t}.p[[Mod[{f, f + 1}, 3, 1]]]]]
   }],
 {{p, {{0, 0}, {0.8, 0.9}, {0.5, 1.5}}}, Locator}, {i, 1, 4}]

enter image description here

It's also easy to generalize to polygons.

$\endgroup$
4
$\begingroup$
SeedRandom[77]
coords = Append[#, First@#] &@RandomReal[1, {3, 2}]; 

Arrowheads + Clock

Dynamic[Graphics[{Arrowheads[{{.05, Clock[{0, 1}, 5, 3]}}], 
   Blue, Arrow @ coords}, Axes -> False]]

enter image description here

With a custom arrowhead:

pnt = Graphics[{Red, PointSize[Large], Point[{0, 0}]}]; 

Dynamic[Graphics[{Arrowheads[{{.05, Clock[{0, 1}, 5, 3], pnt}}], 
   Blue, Arrow @ coords}, Axes -> False]]

enter image description here

Multiple points moving at different speeds on the boundary of an arbitrary polygon and stopping after three tours:

SeedRandom[77]
coords = Append[#, First@#] &@RandomReal[1, {10, 2}];
pnts = Table[Graphics[{ColorData[63, "ColorList"][[i]], AbsolutePointSize[15], 
     Point[{0, 0}]}], {i, 5}];

Dynamic[Graphics[{Blue, 
   Arrowheads[Table[{.05, Mod[i/5 + Clock[{0, 1}, i, 3], 1], pnts[[i]]}, {i, 1, 
      5}]], 
   Arrow @ coords}, Axes -> False, PlotRange -> {{-.1, 1.1}, {-.1, 1.1}}]]

enter image description here

Arrowheads + Animate

Animate[Graphics[{Arrowheads[{{.05, t, pnt}}], Blue, Arrow @ coords}, 
  Axes -> False], {t, 0, 1}]

enter image description here

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.