# What are the most common pitfalls awaiting new users?

As you may already know, Mathematica is a wonderful piece of software.
However, it has a few characteristics that tend to confuse new (and sometimes not-so-new) users. That can be clearly seen from the the fact that the same questions keep being posted at this site over and over.

Suggestions for posting answers:

• One topic per answer
• Focus on non-advanced uses (it's intended to be useful for beginners and as a question closing reference)
• Include a self explanatory title in h2 style
• Explain the symptoms, the mechanism behind the scenes and all possible causes and solutions you can think of. Be sure to include a beginner's level explanation (and a more advance one too, if you're in the mood)
• Include a link to your answer by editing the Index below (for quick reference)

## Index

-
Few suggestions: 1. old definitions in memory and "overloaded" functions like f[x_]:=a; f[x_Integer]=b; 2. Forgotten underscore in patterns f[x]=a 3. Set vs SetDelayed; 4. m = {{1, 2}, {3, 4}} // MatrixForm and then Eigenvalues[q]; 5. Plotting complex function produces empty plot without any warnings. – Nick Stranniy Jan 24 at 22:23
I want to throw $HistoryLength in there, a memory management in general category including MaxMemoryUsed and MemoryConstrained etc – ssch Jan 25 at 0:03 Suggestion: Don't mess with Dynamic before you can master Plot. Be real and patient. You are learning a new language, it doesn't matter if you are a C master – Rojo Jan 25 at 1:09 Suggestion: If appropriate to the problem, force Mathematica to use approximate numerical algorithms to avoid the computational overhead of their symbolic counterparts. There are several ways to do this (e.g., NIntegrate vs. Integrate, using real approximate numbers instead of integers in equations, etc). – David Skulsky Jan 25 at 3:51 Suggestion: mathematica.stackexchange.com/q/18483/193 (Using the result of functions that return replacement rules) – belisarius Jan 26 at 7:46 show 1 more comment We're looking for long answers that provide some explanation and context. Don't just give a one-line answer: please explain why you're recommending it as a solution. Answers that don't explain anything will be deleted. See Good Subjective, Bad Subjective for more information. ## 13 Answers ## Avoiding procedural loops People coming from other languages often translate directly from what they are used to into Mathematica. And that usually means lots of nested For loops and things like that. So "say no to loops" and get programming the Mathematica way! 1. Use Attributes to check if functions are Listable. You can avoid a lot of loops and code complexity by dealing with lists directly, e.g. by adding the lists together directly to get element-by-element addition. 2. Get to know functions like NestList, FoldList, NestWhileList, Inner and Outer. You can use many of these to produce the same results as those complicated nested loops you used to write. 3. Get to know Map (/@), Apply (@@ and @@@), Thread, MapThread and MapIndexed. You'll be able to operate on complex data structures without loops using these. 4. Avoid unpacking/extracting parts of your data (via Part or Extract) and try to handle it as a whole, passing your huge matrix directly to Map or whatever iterative function you use. keywords: loop for-loop do-loop while-loop nestlist foldlist procedural - Rather than post a separate answer perhaps something about packed arrays could be added to this answer. This is a handy link: library.wolfram.com/infocenter/TechNotes/391 – Mike Honeychurch Jan 25 at 3:27 ## Basic syntax issues 1. Avoid single-capital-letter names for your variables, to avoid clashes (consider using the double-struck EscdsAEsc and gothic letters EscgoAEsc instead). Mathematica is case-sensitive. More generally, avoid capitalising your own functions if you can. 2. Mathematica uses square brackets [] for function arguments, unlike most other languages that use round parentheses. See halirutan's exemplary answer for more detail. 3. Learn the difference between Set (=) and SetDelayed (:=). See this question and this tutorial in the Mathematica documentation. 4. Avoid using subscripted symbols in your code. While it can be done, it causes a lot of confusion and is harder to use than just sym[j] or whatever your symbol might be. The reason is that subscripted symbols are not plain symbols, so you canâ€™t assign values (strictly speaking, DownValues) to them directly. 5. When creating matrices and arrays, don't use formatting commands like //TableForm and //MatrixForm in the initial assignment statements. This just won't work if you then want to manipulate your matrix like a normal list. Instead, try defining the matrix, suppressing the output of the definition by putting a semicolon at the end of the line. Then have a command that just reads nameOfMatrix//MatrixForm -- you can even put it on the same line after the semicolon. The reason for this is that if you define the object with a //MatrixForm at the end, it has the form MatrixForm[List[...]], instead of just List[..], and so it can't be manipulated like a list. If you really want to display the output as MatrixForm on the same line you can do (nameOfMatrix=Table[i+j,{i,5},{j,5}])//MatrixForm -  I've been using subscripted symbols for simple linear equations, like point slope, i.e (y_1 - y_0)=m(...); Solve[%,y_1]. It works ok; but there is definitely conflicts if I combine a symbol and subscripted version of that same symbol, i.e.( y - y_0)-m(...); Solve[%,y] causes conflicts for me. I guess this problem can become even more severe in more complex operations? Pitty, cause when I use pad and paper, I love mixing 'y' and 'y_0' /etc.. – Adam Dreaver Jan 26 at 4:19 ## Understand that semicolon (;) is not a delimiter Although it may look to newcomers that semicolons are used in Mathematica as statement terminators as in C or Java, or perhaps as statement separators as in Pascal and its derivatives, in fact, semicolons are the infix form of the function CompoundExpression, just as plus-signs (+) are the infix form of the function Plus. You can verify this by evaluating Hold[a; b; c] // FullForm  Hold[CompoundExpression[a, b, c]] CompoundExpression is necessary to Mathematica because many of the core programming functions such as SetDelayed (:=), Module, Block, and With take only a single expression as their second argument. This second argument is of course the code body and normally requires the evaluation of many expressions. CompoundExpression provides the construct that bundles an indefinite number of expressions into one. Wolfram Research chose semicolon for the binary operator form of CompoundExpression to make Mathematica code look more like C code, but this only syntactic sugar. The only true delimiter in Mathematica is comma (,). ### Update One often sees code like the following data = RandomReal[{0., 10.}, {1000, 2}];  The variable data is probably going to be used as test or example data. The semicolon is added to suppress the output from this Set expression because the output is both very large and no one really cares about its details. Because there is no visible output, it would be easy to assume the expression returns nothing, but that is not true. Mathematica expressions always return something, even if it is only the token Null, which does not print in OutputForm. In the case of CompoundExpression, there is an additional twist -- I quote from the Mathematica documentation: expr1; expr2; returns value Null. If it is given as input, the resulting output will not be printed. Out[n] will nevertheless be assigned to be the value of expr2. This the only case I know of where evaluating an expression at toplevel doesn't assign its actual output to Out[n]. keywords delimiter terminator separator semicolon compound-expression - perhaps a bit more on the actual effect of ;? – Yves Klett Jan 28 at 14:22 @YvesKlett. I think posts to this CW are meant to be restricted to pitfalls and not meant to be replacements for general documentation. – m_goldberg Jan 28 at 14:27 But a common pitfall is not to suppress output or improper use of , vs. ; in Module etc. – Yves Klett Jan 28 at 14:29 @YvesKlett. Yes, that's true. Why don't you write that up as another pitfall? Or edit this contribution to include your point? (After all, it's a CW) – m_goldberg Jan 28 at 14:54 Shouldn't binary form be infix form? In fact, CompoundExpression is in general not a binary operation! – halirutan Jan 28 at 15:39 show 2 more comments ## Understand what Set (=) really does Because Mathematica allows and encourages the use of = as a binary operator for Set, those coming to Mathematica from other languages are likely to retain their well entrenched notion that Set is the equivalent of whatever kind of assignment operator they have previously encountered. It is hard but essential to them to learn that Set actually associates a rewrite rule (an ownvalue) with a symbol. This is a form of symbol binding unlike that in any other programming language in popular use, and eventually leads to shock, dismay, and confusion, when the new user evaluates something like x = x[1] Mathematica's built-in documentation doesn't do a good job of helping the new user to learn how different its symbol binding really is. The information is all there, but organized almost as if to hide rather than reveal the existence and significance of ownvalues. What does it mean to say that "Set actually associates a rewrite rule (an ownvalue) with a symbol"? Let's look at what happens when an "assignment" is made to the symbol a; i.e., when Set[a, 40 + 2] is evaluated. a = 40 + 2  42 The above is just Set[a, 40 + 2] as it is normally written. On the surface all we can see is that the sub-expression 40 + 2 was evaluated to 42 and returned, the binding of a to 42 is a side-effect. In a procedural language, a would now be associated with a chunk of memory containing the value 42. In Mathematica the side effect is to create a new rule called an ownvalue and to associate a with that rule. Mathematica will apply the rule whenever it encounters the symbol a as an atom. Mathematica, being a pretty open system, will let us examine the rule. OwnValues[a]  {HoldPattern[a] :> 42} To emphasize how really different this is from procedural assignment, consider a = a[1]; a  42[1] Surprised? What happened is the ownvalue we created above caused a to rewritten as 42 on the righthand side of the expression. Then Mathematica made a new ownvalue rule which it used to rewrite the a occurring after the semicolon as 42[1]. Again, we can confirm this: OwnValues[a]  {HoldPattern[a] :> 42[1]} An excellent and more detailed explanation of where Mathematica keeps symbol bindings and how it deals with them can be found in the answers to this question. To find out more about this issue within Mathematica's documentation go here. keywords set assign ownvalue variable-binding - +1 But I think the sentence "It is hard but essential to them to learn that Set actually associates a rewrite rule (an ownvalue) with a symbol." deserves further explanation for a new user. – belisarius Jan 25 at 18:20 Not only does the documentation not do a good job of explaining how different Mathematica is to other languages, but in many cases actually attempts to hand-wave the differences away. A user can have read the documentation thoroughly, but then come to a site like this and realise they don't understand the language at all. For this reason I think resources like Leonid's book that deal with things more directly are really essential resources for the newcomer. – Oleksandr R. Jan 25 at 18:22 Consider adding a link to this question which explains the distinction between OwnValues, DownValues, etc. – rcollyer Jan 25 at 18:22 @OleksandrR. The book Power Programming With Mathematica: The Kernel by David B. Wagner also does a good job with this issue. – m_goldberg Jan 25 at 18:31 a[1] = 2;a = 42;a = a[1]; a – m_goldberg Jan 27 at 1:24 show 6 more comments ## Using the result of functions that return replacement rules Most new Mathematica users will at some point encounter the seemingly odd formatting of the output given by functions such as Solve or Root. Let's start with the follwing simple example: Solve[x^2 == 4, x]  {{x -> -2}, {x -> 2}} You might find this output strange for two reasons. We'll have a look at both. ### What do the arrows mean? The output that Solve returns, is what is called a replacement rule in Mathematica. A replacement Rule is of the form lhs -> rhs and does not do much on its own. It is used together with other functions that apply the rule to some expression. The arguably most common of these functions is ReplaceAll, which can be written in the short form /.. As the documentation states expr/.rules applies a rule or list of rules in an attempt to transform each subpart of an expression expr. In practice, this looks like the following: x + 3 /. x -> 2  5 Notice how /. and -> are combined to replace the x in the expression x+3 by 2. And this is also how you can use the Solve output. The simplest form would be: x /. Solve[x^2 == 4, x]  {-2,2} Since you will often face more complicated problems and Solve and its ilk might take quite some time to evaluate, it makes sense in theses cases to only calculate the solutions once and save them for later use. Just like many other expressions, replacement rules can be assigned to symbols using Set: sol = Solve[x^2 == 4, x]; x /. sol  {-2, 2} ### Why the nested structure? At first glance, the nested structure of the output looks strange and you might ask: why is the output of the form {{x -> -2}, {x -> 2}} when it could just could be {x -> -2, x -> 2}? To understand this, take a look at the following: x /. {x -> -2, x -> 2}  -2 Replacement rules can be given in lists to make things like x + y /. {x -> 1, y -> 2} work. When only a single list of rules is given (as in the example above), only one replacement is made for each variable. As the result shows, Mathematica replaces x with the first matching rule it finds. In order to have Mathematica make two (or more) replacements and output a list, the rules have to be given as lists of lists. The nested structure also makes more sense as soon as you start using Solve and other functions with more than one variable. Solve[{x + y == 6, x^2 == y}, {x, y}]  {{x -> -3, y -> 9}, {x -> 2, y -> 4}} You can still apply this list of rules to expressions with either x or y or both. If you only want a certain solution you can acces the element you want either before or after replacement, using functions like First, Last or Part (which is usually written in its postfix form [[...]]): sol2d = Solve[{x + y == 6, x^2 == y}, {x, y}]; First[x - y /. sol2d] x - y /. First[sol2d] Last[x - y /. sol2d] x - y /. sol2d[[2]]  -12 -12 -2 -2 -  This seems more like a guide than a "pitfalls" post. I encourage you to consider posting this under one of the questions that specifically deals with this issue instead, e.g. (6669), (9035). – Mr.Wizard♦ Jan 30 at 6:39 The OP asked for things that tend to confuse new users and this certainly confused me. But I totally see your point. (except for the fact that the post about the documentation above e.g. seems more like a guide, too) maybe we can tweak my answer to make it better meet the purpose of this wiki. – einbandi Jan 30 at 9:48 I see your point after a second read, so +1. Tweaking is fine with me. I commented above partly because you aren't going to get "reputation" for answers in this community-wiki thread as you would if this answer were elsewhere, if that matters to you. – Mr.Wizard♦ Jan 30 at 9:53 # Learn how to use the Documentation Center effectively Mathematica comes with the most comprehensive documentation I have ever seen in a software product. This documentation contains • reference pages for every Mathematica function • tutorials for various topics, which show you step by step how to achieve something • guide pages to give you an overview of functions about a specific topic • a categorised function navigator, to help you find appropriate guide pages and reference pages. • finally, the complete interactive Mathematica book You can always open the Documentation Center by pressing F1. When the cursor (the I-beam) is anywhere near a function, then the help page of this function is opened. E.g. when your cursor is anywhere at the position where the dots are in .I.n.t.e.g.r.a.t.e., you will be directed to the help page of Integrate. ## Reference pages: A reference page is a help page which is dedicated to exactly one Mathematica function (or symbol). In the image below you see the reference page of the Sin function. Usually, some of the sections are open, but here I closed them so you see all parts at once. • In yellow, you see the usage. It gives you instantly information about how many arguments the function expects. Often there is more then one usage. Additionally, a short description is given. • The Details section gives you further information about Options, behavioural details and things which are important to note. In general, this section is only important in a more advanced state. • The Examples section is the most important, because there you have a lot of examples, showing everything starting from simple use cases to very advanced things. Study this section carefully! • See Also gives you a list of functions which are related. Very helpful, when a function does not exactly what you want, because most probably you find help in the referenced pages. • Tutorials shows you tutorials which are related to the function. In the case of Sin it is e.g. the Elementary Transcendental Functions tutorial. • Related Guides gives you a list of related guide pages. • Related Links references to material in the web: Demonstrations, MathWorld pages, etc. In general my recommendation for viewing a help page is the following: 1. Study the usage carefully 2. Look up basic examples. If you don't find what you need, look up all examples 3. Read the Details And of course if you like the how-to style, you should read the referenced tutorials. ## Guide pages: Guide pages collect all functions which belong to a certain topic and they are an excellent resource when you try to find a function you are not knowing yet. The guide page itself is often divided into several subsections collecting similar functions. In the image above for instance the Trigonometric Functions. Furthermore, you can find links to tutorials, etc. when you open the Learning Resources tab. At the end of each guide page you find references to related guide pages. ## Function navigator and virtual book: The rest can be explored by just trying and does not need extensive explanation. To reach the function navigator or the book, you can use the buttons on the top of the Documentation Center. The rest is mostly self-explanatory. The virtual book is a very nice resource when you like to read something from the beginning to the end. In this way you can be sure that you at least scraped every functionality of Mathematica, which you probably miss when you hop between the help pages. But be warned, it is a lot of material! ## Final notes: • Since the complete documentation consists of usual Mathematica notebooks, all calculations and examples can be tested inside the help pages. Of course, you cannot destroy the documentation, because everything is reset when you close a help page. • You can always search the documentation by typing into the search bar on top of the Documentation Center: • When coming from a different programming language, and you are not sure that a certain Mathematica function is equivalent to what you are used to, be sure to check the Properties & Relations section in the reference page to get ideas on what other functions could be relevant for your case. -  +1 This should be pinned to the top:) – Ajasja Feb 18 at 21:45 ## Understand the difference between exact and approximate (Real) numbers Unlike many other computational software, Mathematica allows you to deal with exact integers and rational numbers (heads Integer and Rational), as well as normal floating-point (Real) numbers. While you can use both exact and floating-point numbers in a calculation, using exact quantities where they arenâ€™t required can slow computations down. Also, mixing the data types up in a single list will mess up packed arrays. The different data types are represented differently by Mathematica. This means, for example, that integer zero (0) and real zero (0.) only equal numerically (0 == 0. yields True) but not structurally (0 === 0. yields False). In certain cases you have to test for both or you will run into trouble. And you have to make sure that List index numbers (i.e. the arguments to Part) are exact integers not real numbers. As with any computer language, calculations with real numbers is not exact and will accumulate error. As a consequence, your real-valued calculation might not necessarily return zero even when you think it should. There may be small (less than$10^{-10}$) remainders, which might even be complex valued. If so, you can use Chop to get rid of these. Furthermore, you can carry over the small numerical error, unnoticed: Floor[(45.3 - 45)*100] - 30 (* ==> -1 instead of 0 *)  In such cases, use exact rational numbers instead of reals: Floor[(453/10 - 45)*100] - 30 (* ==> 0 *)  Sometimes, if you are doing a calculation containing some zeros and some approximate real numbers, as well as algebraic expressions, you will end up with approximate zeros multiplied by the algebraic elements in the result. But of course you want them to cancel out, right? Again, use Chop, that removes small real numbers close to zero (smaller than$10^{-10}$according to the default tolerance level). keywords: real integer number-type machine-precision - ## Understand the difference between Set (or =) and SetDelayed (or :=) A common misconception is that = is always used to define variables (such as x = 1) and := is used to define functions (such as f[x_] := x^2). However, there really is no explicit distinction in Mathematica as to what constitutes a "variable" and what constitutes a "function" â€” they're both symbols, which have different rules associated with them. Without going into heavy details, be aware of the following important differences (follow the links for more details): • = is an immediate assignment, whereas := is a delayed assignment. In other words, f = x will assign the value of x to f at definition time, whereas f := x will return the value of x at evaluation time, that is every time f is encountered, x will be recalculated. See also: 1, 2, 3 • If you're plotting a function, whose definition depends on the output of another possibly expensive computation (such as Integrate, DSolve, Sum, etc. and their numerical equivalents) use = or use an Evaluate with :=. Failure to do so will redo the computation for every plot point! This is the #1 reason for "slow plotting". See also: 1, 2 At a slightly more advanced level, you should be aware that: • = holds only its first argument, whereas := holds all its arguments. This does not mean however that Set or SetDelayed don't evaluate their first argument. In fact, they do, in a special way. See also: 1 • =, in combination with :=, can be used for memoization, which can greatly speed up certain kinds of computations. See also: 1 Here is one discussion which illustrates why normally one should use SetDelayed to define functions. Even for interactive work, making systematic use of this practice pays huge dividends. keywords: set setdelayed assignment definition function variable -  Nice! Perhaps the behavior of (for example)f = Interpolation[Array[RandomInteger@1000 &, 1000]] with Set and SetDelayedcould be illustrative. – belisarius Jan 26 at 7:03 ## Lingering Definitions: when calculations go bad One aspect of Mathematica that sometimes confuses new users, and has confused me often enough, is the Lingering Definition Problem. Here's a quick experiment you can do, to see the problem clearly. 1: Launch (or re-launch) Mathematica, create a new notebook, and evaluate the following expression: x = 2 + 2  2: Now close the notebook document without saving (and without quitting Mathematica), and create another fresh notebook. Evaluate this: x  The result can be surprising to beginners - after all, you think you've just removed all visible traces of x, closing the only notebook with any record of it, and yet, it still exists, and still has the value 4. To explain this, you need to know that when you launch the Mathematica application, you're launching two linked but separate components: the visible front-end, which handles the notebooks and user interaction, and the invisible kernel, which is the mathematical engine that underpins the Mathematica system. The notebook interface is like the flight deck or operating console, and the kernel is like the engine, hidden away but ready to provide the necessary power. So, what happened when you typed the expression x = 2 + 2, is that the front-end sent it to the kernel for evaluation, and received the result back from the kernel for display. The resulting symbol, and its value, is now part of the kernel. You can close documents and open new ones, but the kernel's knowledge of the symbol x is unaffected, until something happens to change that. And it's these lingering definitions that can confuse you - symbols that are not visible in your current notebook are still present and defined in the kernel, and might affect your current evaluations. This also affects subscripted expressions - consider the following evaluation, where the initially innocent symbol i is assigned an explicit value: If you want to use subscripted symbols in a more robust fashion, you should use e.g. the Notation package. There are a couple of things you can learn to do to avoid problems caused by Lingering Definitions. Before you provide definitions for specific symbols, clear any existing values that you've defined so far in the session, with the Clear function. Clear[x]  Or you can clear all symbols in the global context, using ClearAll. ClearAll["Global*"]  When all else fails, quit the kernel (choose Evaluation>Quit Kernel from the menu or type Quit[], thereby forgetting all the symbols (and everything else) that you've defined in the kernel. Mathematica allows you to keep your notebooks separate, so that they don't share the same symbols. See this Q and A for more. - Thought I'd have a go at something basic. – cormullion Jan 27 at 15:33 I'd mention that the notebooks can be logically separated by setting their default contexts to something other than Global . – rcollyer Jan 27 at 18:02 +1 I'd like more a title like "Lingering definitions: Why your notebook calcs may return weird results", which links the problem with the perceived symptoms – belisarius Jan 27 at 20:43 I added a bit about subscript issues, not sure if it should be a separate answer, but it fits nicely into the scope of this one... – Yves Klett Jan 28 at 10:15 ## Attempting to make an assignment to the argument of a function Quite frequently new users attempt something like this: foo[bar_, new_] := AppendTo[bar, new] x = {1}; foo[x, 2]  To be met with: AppendTo::rvalue: {1} is not a variable with a value, so its value cannot be changed. >> Or: f[x_, y_] := (x = x + y; x) a = 1; b = 2; f[a, b]  Set::setraw: Cannot assign to raw object 1. >> This is because the value of the symbol x, a, etc. is inserted into the right-hand-side definition. One needs either a Hold attribute for in-place modification: SetAttributes[foo, HoldFirst] foo[bar_, new_] := AppendTo[bar, new] x = {1}; foo[x, 2]; x  {1, 2}  Passing held arguments to a function with Attributes is similar to passing arguments by reference in other languages (ByRef keyword in VBA, or passing a pointer or a reference in C++ for example). Or a temporary symbol, typically created with Module, for intermediate calculations: f[x_, y_] := Module[{t}, t = x + y; t] a = 1; b = 2; f[a, b]  3  (This definition is of course highly contrived for such a simple operation.) Other Hold attributes include: HoldAll, HoldRest, and HoldAllComplete. For some more details, see also this discussion. - Passing held arguments to a function with Attributes is similar to passing arguments by reference in other languages. – Faysal Aberkane Feb 5 at 9:40 @Faysal If you feel that should be part of the answer feel free to edit it. I'm quite unfamiliar with most other languages so I'll not do that myself. – Mr.Wizard Feb 5 at 10:42 Surprising from someone of your level ! – Faysal Aberkane Feb 5 at 11:14 ## Assuming commands will have side effects which they don't: Consider: In[97]:= list = {1, 2, 3} Out[97]= {1, 2, 3} In[98]:= Append[list, 4] Out[98]= {1, 2, 3, 4} In[99]:= list Out[99]= {1, 2, 3}  When I was first learning Mathematica, I assumed that Append[list, 4] would take the list list and append the element 4 to it, overwriting the previous list. But this is not right: Append[] returns the result of appending 4 to list without overwriting the input list. In general, a command which alters its inputs, or other global variables, is said to have a side effect. Mathematica in general avoids side effects whenever it would be reasonable to do so, encouraging (but not forcing) a functional programming style. I think it is a safe statement that the Mathematica documentation will always say explicitly when a command has a side effect. For example, the documentation (version 7) for Delete[] reads Delete[expr,n] deletes the element at position$n$in$expr\$.

If I encountered this sentence in the documentation of a language I had never seen before, I would assume that Delete[] altered the expression expr. However, with experience reading Mathematica documentation, I am confident that if this side effect existed, it would be stated explicitly and, indeed, Delete[] has no side effects.

I remember finding many of the list commands confusing because their names are verbs which, in English, would seem to suggest that the list was being restructured. In particular, note that Append[], Prepend[], Take[], Drop[], Insert[], Delete[], Replace[], ReplacePart[], DeleteDuplicates[], Flatten[], Join[], Transpose[], Reverse[] and Sort[] are all side effect free.

For completeness, I should mention that for some functions there are side-effect-having alternatives, usually with an added prefix at the end of the function name, like AppendTo (for Append), AddTo (for Add), SubtractFrom (for Subtract), TimesBy (for Times), etc. These functions not just perform the calculation but also save the new result into the variable they were called with. Because of this, they must be called with a symbol insted of a number or an explicit list.

-
"Special forms of assignment" :reference.wolfram.com/mathematica/tutorial/… – belisarius Mar 14 at 11:56

## Use Consistent Naming Conventions

This is basic, and good practice in any programming language, but Mathematica's slow-to-fail nature makes it in a sense a less forgiving language than others, so those of us who have in the past gotten away with bad habits may run into trouble. Suppose I have a function

loseMemoriesLikeTearsInRain[]


which I later try to invoke thusly:

loseMemoryLikeTearsInRain[]


In some other languages this would result in a compile error, and is easily spotted, but in Mathematica, what usually happens is either

1. the unevaluated expression loseMemoryLikeTearsInRain[] gets passed on to some other function,
2. Mathematica silently moves on without performing the side effects the function is supposed to perform, or
3. both.

For this reason, I have found it especially important to have a consistent set of conventions for naming things. The exact choice is to some extent a matter of taste, but here are some things that have tripped me up:

1. inconsistent capitalization,
2. starting function names with a capital letter (can conflict with predefined Mathematica functions),
3. inconsistent use of singular and plural (I now try to favor the singular whenever possible),
4. names that do not distinguish between pure functions and those with side effects (I now use noun-clauses and verb-clauses respectively),
5. generally inconsistent, idiosyncratic, or poorly thought out use of terminology,
6. attempts to abbreviate beyond what is reasonable or memorable. (One consistent convention is to drop all vowels other than the first letter of the word, whch mks evrythng lk lk ths.)
-
Autocompletion is useful for this purpose – belisarius Feb 8 at 14:14
Concerning Mathematica, I would not recommend abbreviating function names. Lengthy function names isn't really a big issue performance-wise, and in my experience it is more important that you remember years later what your function does than to save some typing. Mathematica itself is very eminent on giving informative though long names (think of FrequencySamplingFilterKernel, SymmetrizedIndependentComponents, etc.). – István Zachar Feb 18 at 20:37

## Undo is not available in general

As the title already claims, there is no overall option to undo certain steps in Mathematica files. Nevertheless, inside the boxes one can undo as long as one stays inside.

Personal recommendations: 1. Never delete some code except if what you were doing was completely wrong. 2. If you want to create a notebook for presentation, take an additional file as sandbox aside where you test all the things that should later appear in the notebook.

-
Re Personal recommendation 2: Give your sandbox a separate context, as described here mathematica.stackexchange.com/a/3484/1200 , so that definitions from the Sandbox don't leak into the presentation. – David Speyer Feb 19 at 0:08